TPS79618KTT Texas Instruments component image

TPS79618KTT

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC REG LIN 1.8V 1A DDPAK/TO263-5

Listed in PMIC - Voltage Regulators - Linear

4,392 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TPS79618KTT?

TPS79618KTT is a ic reg lin 1.8v 1a ddpak/to263-5, featuring the TO-263-6, D²Pak (5 Leads + Tab), TO-263BA package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

21 variants of this series in stock
Part Number Description Stock Unit Price Status
MAX882ESA IC REG LIN POS ADJ 200MA 8SOIC 1,064 $4.9000 In Stock
MAX883CSA+ IC REG LIN POS ADJ 200MA 8SOIC 1,148 $4.5400 In Stock
MAX883CSA+T IC REG LIN POS ADJ 200MA 8SOIC 2,530 $2.0020 In Stock
MAX884CSA+T IC REG LIN POS ADJ 200MA 8SOIC 4,441 RFQ In Stock
MAX883MPA/PR+ IC REG LINEAR POS ADJ 200MA 8DIP 2,146 RFQ In Stock
MAX882CSA+T IC REG LIN POS ADJ 200MA 8SOIC 1,455 $3.5500 In Stock
MAX883CSA-T IC REG LIN POS ADJ 200MA 8SOIC 1,797 RFQ In Stock
MAX883ESA+T IC REG LIN POS ADJ 200MA 8SOIC 2,193 $2.3300 In Stock
MAX882CSA IC REG LIN POS ADJ 200MA 8SOIC 1,036 RFQ In Stock
MAX883CPA IC REG LINEAR POS ADJ 200MA 8DIP 3,372 RFQ In Stock
+ 11 more variants in stock — browse the full category

Technical Parameters

TPS79618KTT Specifications

Series -
Package Tube
Part Status Obsolete
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 5.5V
Voltage - Output (Min/Fixed) 1.8V
Voltage - Output (Max) -
Voltage Dropout (Max) -
Current - Output 1A
Current - Quiescent (Iq) 385 µA
Current - Supply (Max) -
PSRR 59dB ~ 42dB (100Hz ~ 100kHz)
Control Features Enable
Protection Features Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case TO-263-6, D²Pak (5 Leads + Tab), TO-263BA
Supplier Device Package DDPAK/TO-263-5

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need TPS79618KTT or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.