TPS73218DCQ Rochester Electronics component image

TPS73218DCQ

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

IC REG LIN 1.8V 250MA SOT223-6

Listed in PMIC - Voltage Regulators - Linear

5,190 pcs in stock ships same day before 6pm

from $0.9700

Quantity Unit Price
1 - 389 $0.9700 BEST
390+ $0.9700 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TPS73218DCQ?

TPS73218DCQ is a ic reg lin 1.8v 250ma sot223-6, featuring the SOT-223-6 package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Rochester Electronics Series Variants in Stock

8 variants of this series in stock
Part Number Description Stock Unit Price Status
TPS73230DCQR IC REG LINEAR 3V 250MA SOT223-6 6,207 $0.8100 In Stock
TPS73219DBVR IC REG LINEAR 1.9V 250MA SOT23-5 7,501 $0.6700 In Stock
TPS73215DCQR IC REG LIN 1.5V 250MA SOT223-6 6,209 $0.8100 In Stock
TPS73201DRBR TPS732 CAP-FREE, NMOS, 250MA LOW 7,383 $0.6800 In Stock
TPS73216DBVT IC REG LINEAR NMOS 250MA 6,529 $0.7700 In Stock
TPS73215DCQ IC REG LIN 1.5V 250MA SOT223-6 5,195 $0.9700 In Stock
TPS73250DCQ TPS732 CAP-FREE, NMOS, 250MA LOW 5,190 $0.9700 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

TPS73218DCQ Specifications

Series -
Package Bulk
Part Status Active
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 5.5V
Voltage - Output (Min/Fixed) 1.8V
Voltage - Output (Max) -
Voltage Dropout (Max) 0.15V @ 250mA
Current - Output 250mA
Current - Quiescent (Iq) 550 µA
Current - Supply (Max) 950 µA
PSRR 58dB ~ 37dB (100Hz ~ 10kHz)
Control Features Enable
Protection Features Over Current, Over Temperature, Short Circuit, Reverse Polarity
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case SOT-223-6
Supplier Device Package SOT-223-6

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need TPS73218DCQ or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.