TPS72501DCQR Rochester Electronics component image

TPS72501DCQR

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

TPS725 LOW INPUT VOLTAGE, 1-A LO

Listed in PMIC - Voltage Regulators - Linear

2,639 pcs in stock ships same day before 6pm

from $0.8806

Quantity Unit Price
1 - 2,499 $1.9300
2,500 - 4,999 $0.9149
5,000+ $0.8806 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TPS72501DCQR?

TPS72501DCQR is a tps725 low input voltage, 1-a lo, featuring the SOT-223-6 package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Rochester Electronics Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
TPS72518DCQG4 IC REG LINEAR 1.8V 1A SOT223-6 2,214 $2.3100 In Stock
TPS72518KTTT IC REG LINEAR FIXED POS LDO REG 2,550 $1.9900 In Stock
TPS72515DCQG4 IC REG LINEAR 1.5V 1A SOT223-6 2,195 $2.3100 In Stock
TPS72516DCQR IC REG LINEAR 1.6V 1A SOT223-6 2,624 $1.9300 In Stock
TPS72501KTTT IC REG LINEAR ADJ POS LDO REG 2,560 $1.9900 In Stock
TPS72525KTTT IC REG LINEAR FIXED POS LDO REG 2,542 $1.9900 In Stock
TPS72518KTTR TPS725 LOW INPUT VOLTAGE, 1-A LO 2,550 $2.0000 In Stock
TPS72516KTTT IC REG LIN 1.6V 1A DDPAK/TO263-5 2,223 $2.3000 In Stock
TPS72515KTTT IC REG LINEAR FIXED POS LDO REG 2,549 $1.9900 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

TPS72501DCQR Specifications

Series -
Package Bulk
Part Status Active
Output Configuration Positive
Output Type Adjustable
Number of Regulators 1
Voltage - Input (Max) 6V
Voltage - Output (Min/Fixed) 1.22V
Voltage - Output (Max) 5.5V
Voltage Dropout (Max) 0.28V @ 1A
Current - Output 1A
Current - Quiescent (Iq) 225 µA
Current - Supply (Max) 325 µA
PSRR 60dB (1kHz)
Control Features Enable, Reset
Protection Features Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case SOT-223-6
Supplier Device Package SOT-223-6

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need TPS72501DCQR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.