TPS70445PWPR Texas Instruments component image

TPS70445PWPR

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC REG LINEAR 3.3V/1.2V 24HTSSOP

Listed in PMIC - Voltage Regulators - Linear

1,312 pcs in stock ships same day before 6pm

from $3.8470

Quantity Unit Price
1 - 1,999 $3.9245
2,000+ $3.8470 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TPS70445PWPR?

TPS70445PWPR is a ic reg linear 3.3v/1.2v 24htssop, featuring the 24-TSSOP (0.173", 4.40mm Width) Exposed Pad package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

8 variants of this series in stock
Part Number Description Stock Unit Price Status
TPS70445PWP IC REG LINEAR 3.3V/1.2V 24HTSSOP 752 $7.1100 In Stock
TPS70458PWP IC REG LINEAR 3.3V/2.5V 24HTSSOP 745 $7.1100 In Stock
TPS70451PWPR IC REG LINEAR 3.3V/1.8V 24HTSSOP 1,317 $3.9245 In Stock
TPS70458PWPRG4 IC REG LINEAR 3.3V/2.5V 24HTSSOP 1,304 $3.9245 In Stock
TPS70451PWP IC REG LINEAR 3.3V/1.8V 24HTSSOP 748 $7.1100 In Stock
TPS70402PWPR IC REG LINEAR POS ADJ 24HTSSOP 788 $6.6000 In Stock
TPS70402PWP IC REG LINEAR POS ADJ 24HTSSOP 748 $7.1100 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

TPS70445PWPR Specifications

Series -
Package Tape & Reel (TR)
Part Status Active
Output Configuration Positive
Output Type Fixed
Number of Regulators 2
Voltage - Input (Max) 6V
Voltage - Output (Min/Fixed) 3.3V, 1.2V
Voltage - Output (Max) -
Voltage Dropout (Max) 0.25V @ 1A, -
Current - Output 1A, 2A
Current - Quiescent (Iq) 250 µA
Current - Supply (Max) -
PSRR 65dB (1kHz), 60dB (1kHz)
Control Features Enable, Power Good, Reset, Sequencing
Protection Features Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case 24-TSSOP (0.173", 4.40mm Width) Exposed Pad
Supplier Device Package 24-HTSSOP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need TPS70445PWPR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.