TPS2231PWPR Rochester Electronics component image

TPS2231PWPR

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

TPS2231 EXPRESSCARD SINGLE POWER

Listed in PMIC - Power Distribution Switches, Load Drivers

3,250 pcs in stock ships same day before 6pm

from $1.4045

Quantity Unit Price
1 - 1,999 $1.5600
2,000+ $1.4045 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TPS2231PWPR?

TPS2231PWPR is a tps2231 expresscard single power, featuring the 24-TSSOP (0.173", 4.40mm Width) Exposed Pad package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Rochester Electronics Series Variants in Stock

9 variants of this series in stock
Part Number Description Stock Unit Price Status
TPS2231RGPT TPS2231 EXPRESSCARD SINGLE POWER 3,063 $1.6500 In Stock
TPS2236DAP TPS2236 DUAL SLOT EXPRESSCARD PO 2,322 $2.1900 In Stock
TPS2231RGPR TPS2231 EXPRESSCARD SINGLE POWER 3,545 $1.4300 In Stock
TPS2231MRGPT-3 TPS2231 EXPRESSCARD SINGLE POWER 2,950 $1.7200 In Stock
TPS2231MRGPR TPS2231 EXPRESSCARD SINGLE POWER 3,528 $1.4300 In Stock
TPS2231PWR TPS2231 EXPRESSCARD SINGLE POWER 3,539 $1.4300 In Stock
TPS2231MRGPR-2 TPS2231 EXPRESSCARD SINGLE POWER 3,532 $1.4300 In Stock
TPS2231MRGPR-3 TPS2231 EXPRESSCARD SINGLE POWER 3,374 $1.5000 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

TPS2231PWPR Specifications

Series -
Package Bulk
Part Status Active
Switch Type ExpressCard™ Switch
Number of Outputs 3
Ratio - Input:Output 1:1
Output Configuration High Side
Output Type -
Interface -
Voltage - Load 1.5V, 3.3V
Voltage - Supply (Vcc/Vdd) Not Required
Current - Output (Max) 1.3A
Rds On (Typ) 45mOhm
Input Type -
Features Power Good, Status Flag
Fault Protection Current Limiting (Fixed), Over Temperature
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Supplier Device Package 24-HTSSOP
Package / Case 24-TSSOP (0.173", 4.40mm Width) Exposed Pad

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need TPS2231PWPR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.