TPS2220APWP Rochester Electronics component image

TPS2220APWP

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

TPS2220A 1A SINGLE-SLOT PC CARD

Listed in PMIC - Power Distribution Switches, Load Drivers

3,849 pcs in stock ships same day before 6pm

from $0.5766

Quantity Unit Price
1 - 9 $1.3100
10 - 59 $1.1755
60 - 119 $1.1088
120 - 539 $0.9447
540 - 1,019 $0.7761
1,020 - 2,519 $0.6431
2,520 - 5,039 $0.5987
5,040+ $0.5766 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TPS2220APWP?

TPS2220APWP is a tps2220a 1a single-slot pc card, featuring the 24-TSSOP (0.173", 4.40mm Width) Exposed Pad package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Rochester Electronics Series Variants in Stock

8 variants of this series in stock
Part Number Description Stock Unit Price Status
TPS2223ADBR TPS2223A DUAL-SLOT CARDBUS POWER 2,194 $2.3300 In Stock
TPS2223ADBG4 TPS2223A DUAL-SLOT CARDBUS POWER 1,822 $2.8000 In Stock
TPS2224ADB TPS2224A DUAL-SLOT CARDBUS POWER 1,674 $3.0400 In Stock
TPS2220ADBR TPS2220A 1A SINGLE-SLOT PC CARD 4,626 $1.0900 In Stock
TPS2223APWPR TPS2223A DUAL-SLOT CARDBUS POWER 2,182 $2.3300 In Stock
TPS2224ADBR TPS2224A DUAL-SLOT CARDBUS POWER 2,009 $2.5300 In Stock
TPS2226ADBR TPS2226A DUAL-SLOT CARDBUS POWER 1,870 $2.7400 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

TPS2220APWP Specifications

Series -
Package Bulk
Part Status Active
Switch Type PCMCIA Switch
Number of Outputs 3
Ratio - Input:Output 1:1
Output Configuration High Side
Output Type -
Interface Serial
Voltage - Load 3.3V, 5V, 12V
Voltage - Supply (Vcc/Vdd) Not Required
Current - Output (Max) 1A
Rds On (Typ) 95mOhm
Input Type -
Features Status Flag
Fault Protection Current Limiting (Fixed), Over Temperature
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Supplier Device Package 24-HTSSOP
Package / Case 24-TSSOP (0.173", 4.40mm Width) Exposed Pad

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need TPS2220APWP or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.