TLV2783IDGSR Texas Instruments component image

TLV2783IDGSR

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP GP 2 CIRCUIT 10VSSOP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

1,888 pcs in stock ships same day before 6pm

from $1.6486

Quantity Unit Price
1 - 2,499 $2.7000
2,500 - 4,999 $1.7130
5,000+ $1.6486 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TLV2783IDGSR?

TLV2783IDGSR is a ic opamp gp 2 circuit 10vssop, featuring the 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

18 variants of this series in stock
Part Number Description Stock Unit Price Status
TLV2781CDBVR IC OPAMP GP 1 CIRCUIT SOT23-5 6,845 $0.7348 In Stock
TLV2782CDG4 IC OPAMP GP 2 CIRCUIT 8SOIC 2,424 $2.1061 In Stock
TLV2780IDBVT IC OPAMP GP 1 CIRCUIT SOT23-6 1,957 $2.6100 In Stock
TLV2784CPWG4 IC OPAMP GP 4 CIRCUIT 14TSSOP 2,146 RFQ In Stock
TLV2782AIDRG4 IC OPAMP GP 2 CIRCUIT 8SOIC 3,411 RFQ In Stock
TLV2780CDBVR IC OPAMP GP 1 CIRCUIT SOT23-6 4,362 $1.1590 In Stock
TLV2784IPWR IC OPAMP GP 4 CIRCUIT 14TSSOP 2,438 $2.0775 In Stock
TLV2784CPWR IC OPAMP GP 4 CIRCUIT 14TSSOP 3,156 $1.6065 In Stock
TLV2780IDG4 IC OPAMP GP 1 CIRCUIT 8SOIC 3,126 RFQ In Stock
TLV2780CDBVT IC OPAMP GP 1 CIRCUIT SOT23-6 2,066 $2.4800 In Stock
+ 8 more variants in stock — browse the full category

Technical Parameters

TLV2783IDGSR Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Amplifier Type General Purpose
Number of Circuits 2
Output Type Rail-to-Rail
Slew Rate 5V/µs
Gain Bandwidth Product 8 MHz
-3db Bandwidth -
Current - Input Bias 2.5 pA
Voltage - Input Offset 250 µV
Current - Supply 650µA (x2 Channels)
Current - Output / Channel 23 mA
Voltage - Supply, Single/Dual (±) 1.8V ~ 3.6V, ±0.9V ~ 1.8V
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case 10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
Supplier Device Package 10-VSSOP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TLV2783IDGS TLV2783 DUAL 1.8V RRIO, 8MHZ AMP 3,186 $1.5900 100%
MAX4243EUB IC OPAMP GP 2 CIRCUIT 10UMAX 1,454 RFQ 81%
MAX4243EUB+T IC OPAMP GP 2 CIRCUIT 10UMAX 2,049 $2.4830 81%
MAX4043EUB+T IC OPAMP GP 2 CIRCUIT 10UMAX 1,466 RFQ 68%
MAX4043EUB+ IC OPAMP GP 2 CIRCUIT 10UMAX 2,508 $2.0200 68%
TLV2623IDGS IC OPAMP GP 2 CIRCUIT 10VSSOP 2,161 $2.3600 62%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need TLV2783IDGSR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.