TLV272DMR2G Sanyo Semiconductor/ON Semiconductor component image

TLV272DMR2G

In Stock

Sanyo Semiconductor/ON Semiconductor logo Sanyo Semiconductor/ON Semiconductor · franchised distributor

R2R DUAL AMPLIFIER 3MHZ OPAMP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

7,084 pcs in stock ships same day before 6pm

from $0.7100

Quantity Unit Price
1+ $0.7100 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TLV272DMR2G?

TLV272DMR2G is a r2r dual amplifier 3mhz opamp, featuring the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Sanyo Semiconductor/ON Semiconductor Series Variants in Stock

2 variants of this series in stock
Part Number Description Stock Unit Price Status
TLV274DTBR2G OPERATIONAL AMPLIFIER, 3MHZ, LOW 5,191 $0.9700 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

TLV272DMR2G Specifications

Series Automotive, AEC-Q100
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Amplifier Type General Purpose
Number of Circuits 2
Output Type Rail-to-Rail
Slew Rate 2.8V/µs
Gain Bandwidth Product 3 MHz
-3db Bandwidth -
Current - Input Bias 5 pA
Voltage - Input Offset 1.3 V
Current - Supply 465µA (x2 Channels)
Current - Output / Channel 65 mA
Voltage - Supply, Single/Dual (±) 2.7V ~ 36V
Operating Temperature -40°C ~ 125°C (TA)
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package Micro8™

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
NCV272DMR2G R2R DUAL AMPLIFIER 3MHZ OPAMP 6,209 $0.8100 100%
TSB712IST IC OPAMP GP 2 CIRCUIT 8MINISO 2,476 $2.0500 100%
TSB712IYST IC OPAMP GP 2 CIRCUIT 8MINISO 2,075 $2.4500 100%
NCS20072DMR2G R2R DUAL AMPLIFIER 14,741 $0.3400 100%
TSB7192IYST IC OPAMP GP 2 CIRCUIT 8MINISO 2,089 $2.4500 100%
NCV20072DMR2G OPERATIONAL AMPLIFIER, 2 FUNC, 4 12,866 $0.3900 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Sanyo Semiconductor/ON Semiconductor Parts in Stock

Request a Quote

Need TLV272DMR2G or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.