TLV2453CDGSG4 Texas Instruments component image

TLV2453CDGSG4

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP GP 2 CIRCUIT 10VSSOP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

3,686 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TLV2453CDGSG4?

TLV2453CDGSG4 is a ic opamp gp 2 circuit 10vssop, featuring the 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) package, Surface Mount mounting. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Texas Instruments Series Variants in Stock

15 variants of this series in stock
Part Number Description Stock Unit Price Status
TLV2453AIDRG4 IC OPAMP GP 2 CIRCUIT 14SOIC 3,789 RFQ In Stock
TLV2454AIPWG4 IC GP OPAMP 4 CIRCUIT 14TSSOP 3,061 $1.6500 In Stock
TLV2455CPWG4 IC OPAMP GP 4 CIRCUIT 16TSSOP 4,724 RFQ In Stock
TLV2455CNG4 IC OPAMP GP 4 CIRCUIT 16DIP 3,238 RFQ In Stock
TLV2453AING4 IC OPAMP GP 2 CIRCUIT 14DIP 2,564 RFQ In Stock
TLV2455ING4 IC OPAMP GP 4 CIRCUIT 16DIP 4,109 RFQ In Stock
TLV2453IDRG4 IC OPAMP GP 2 CIRCUIT 14SOIC 3,563 RFQ In Stock
TLV2455CN IC GP OPAMP 4 CIRCUIT 16DIP 2,625 $1.9300 In Stock
TLV2452IDG4 IC GP OPAMP 2 CIRCUIT 8SOIC 4,347 $1.1600 In Stock
TLV2450AID IC GP OPAMP 1 CIRCUIT 8SOIC 4,667 $1.0800 In Stock
+ 5 more variants in stock — browse the full category

Technical Parameters

TLV2453CDGSG4 Specifications

Series -
Package Tube
Part Status Obsolete
Amplifier Type General Purpose
Number of Circuits 2
Output Type Rail-to-Rail
Slew Rate 0.11V/µs
Gain Bandwidth Product 220 kHz
-3db Bandwidth -
Current - Input Bias 500 pA
Voltage - Input Offset 300 µV
Current - Supply 23µA (x2 Channels)
Current - Output / Channel 10 mA
Voltage - Supply, Single/Dual (±) 2.7V ~ 6V, ±1.35V ~ 3V
Operating Temperature 0°C ~ 70°C
Mounting Type Surface Mount
Package / Case 10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
Supplier Device Package 10-VSSOP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TLV2453CDGSR TLV2453 DUAL MICROPOWER RAIL-TO- 3,828 $1.3200 100%
TLV2453IDGSR TLV2453 DUAL MICROPOWER RAIL-TO- 3,653 $1.3800 100%
TLV2453IDGS TLV2453 DUAL MICROPOWER RAIL-TO- 3,127 $1.6200 100%
TLV2453IDGSG4 IC OPAMP GP 2 CIRCUIT 10VSSOP 2,379 $2.1453 100%
TLV9062SIDGSR IC CMOS 2 CIRCUIT 10VSSOP 5,250 $0.9600 78%
TLV9102SIDGSR DUAL 1MHZ, 16-V RAIL-TO-RAIL INP 4,303 $1.1700 55%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need TLV2453CDGSG4 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.