TLC27L1BIP Rochester Electronics component image

TLC27L1BIP

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

OPERATIONAL AMPLIFIER

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

11,935 pcs in stock ships same day before 6pm

from $0.4200

Quantity Unit Price
1+ $0.4200 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TLC27L1BIP?

TLC27L1BIP is a operational amplifier, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Rochester Electronics Series Variants in Stock

6 variants of this series in stock
Part Number Description Stock Unit Price Status
TLC27L1IDR TLC27L1 LINCMOS LOW-POWER OPERAT 6,977 $0.7200 In Stock
TLC27L1CP TLC27L1 LINCMOS LOW-POWER OPERAT 6,994 $0.7200 In Stock
TLC27L1AIP OPERATIONAL AMPLIFIER 12,244 $0.4100 In Stock
TLC27L1ACP TLC27L1A SINGLE IMPROVED OFFSET 8,806 $0.5700 In Stock
TLC27L1CDR TLC27L1 LINCMOS LOW-POWER OPERAT 7,279 $0.6900 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

TLC27L1BIP Specifications

Series -
Package Tube
Part Status Active
Amplifier Type CMOS
Number of Circuits 1
Output Type -
Slew Rate 0.03V/µs
Gain Bandwidth Product 110 MHz
-3db Bandwidth -
Current - Input Bias 0.7 pA
Voltage - Input Offset 1.1 mV
Current - Supply 14µA
Current - Output / Channel 30 mA
Voltage - Supply, Single/Dual (±) 4V ~ 16V, ±2V ~ 8V
Operating Temperature 0°C ~ 70°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MAX408CPA OPERATIONAL AMPLIFIER 952 $5.4300 100%
TLC27L2IP IC OPAMP GP 2 CIRCUIT 8DIP 4,080 $1.2400 100%
TLC27L1AIP OPERATIONAL AMPLIFIER 12,244 $0.4100 100%
TLC27L2CP-A OPERATIONAL AMPLIFIER 25,352 $0.1976 100%
TLC271IP IC OPAMP GP 1 CIRCUIT 8DIP 4,316 $1.1700 100%
MAX408AEPA-4 OPERATIONAL AMPLIFIER 4,719 $1.0700 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need TLC27L1BIP or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.