TLC271BCP Rochester Electronics component image

TLC271BCP

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

TLC271B PROGRAMMABLE LOW-POWER O

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

10,236 pcs in stock ships same day before 6pm

from $0.1979

Quantity Unit Price
1 - 9 $0.4900
10 - 49 $0.4388
50 - 99 $0.4166
100 - 499 $0.3422
500 - 999 $0.2827
1,000 - 2,499 $0.2232
2,500 - 4,999 $0.2083
5,000+ $0.1979 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TLC271BCP?

TLC271BCP is a tlc271b programmable low-power o, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Rochester Electronics Series Variants in Stock

4 variants of this series in stock
Part Number Description Stock Unit Price Status
TLC271AIP TLC271A PROGRAMMABLE LOW-POWER O 10,247 $0.4900 In Stock
TLC271BIP TLC271B PROGRAMMABLE LOW-POWER U 9,655 $0.5200 In Stock
TLC271BCDG4 TLC271B PROGRAMMABLE LOW-POWER O 9,662 $0.5200 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

TLC271BCP Specifications

Series LinCMOS™
Package Bulk
Part Status Active
Amplifier Type General Purpose
Number of Circuits 1
Output Type -
Slew Rate 5.3V/µs
Gain Bandwidth Product 2.2 MHz
-3db Bandwidth -
Current - Input Bias 0.7 pA
Voltage - Input Offset 390 µV
Current - Supply 950µA
Current - Output / Channel 30 mA
Voltage - Supply, Single/Dual (±) 3V ~ 16V, ±1.5V ~ 8V
Operating Temperature 0°C ~ 70°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TLV2402IP TLV2402 DUAL MICROPOWER RRIO OPE 2,887 $1.7500 92%
TLV2401IP IC OPAMP GP 1 CIRCUIT 8DIP 2,060 $2.4800 92%
TLC271BIP TLC271B PROGRAMMABLE LOW-POWER U 9,655 $0.5200 87%
TLC082IP IC OPAMP GP 2 CIRCUIT 8DIP 1,954 $2.6100 82%
TLC080IP TLC080 SINGLE WIDE-BANDWIDTH HIG 4,593 $1.1000 82%
TLC070IP IC OPAMP GP 1 CIRCUIT 8DIP 2,134 $2.3900 82%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need TLC271BCP or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.