TLC2654ACP Texas Instruments component image

TLC2654ACP

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP GP 1 CIRCUIT 8DIP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

809 pcs in stock ships same day before 6pm

from $3.2833

Quantity Unit Price
1 - 9 $6.5400
10 - 49 $5.8754
50 - 99 $5.5544
100 - 499 $4.8140
500 - 999 $4.0980
1,000 - 2,499 $3.4561
2,500+ $3.2833 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TLC2654ACP?

TLC2654ACP is a ic opamp gp 1 circuit 8dip, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

5 variants of this series in stock
Part Number Description Stock Unit Price Status
TLC2654CP IC OPAMP GP 1 CIRCUIT 8DIP 1,039 $5.0200 In Stock
TLC2654C-8DG4 IC OPAMP GP 1 CIRCUIT 8SOIC 1,240 $4.1526 In Stock
TLC2654IPG4 IC OPAMP GP 1 CIRCUIT 8DIP 1,343 $3.8446 In Stock
TLC2654C-8DR IC OPAMP GP 1 CIRCUIT 8SOIC 1,640 $3.1062 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

TLC2654ACP Specifications

Series LinCMOS™
Package Tube
Part Status Active
Amplifier Type General Purpose
Number of Circuits 1
Output Type -
Slew Rate 3.7V/µs
Gain Bandwidth Product 1.9 MHz
-3db Bandwidth -
Current - Input Bias 50 pA
Voltage - Input Offset 4 µV
Current - Supply 1.5mA
Current - Output / Channel 50 mA
Voltage - Supply, Single/Dual (±) 4.6V ~ 16V, ±2.3V ~ 8V
Operating Temperature 0°C ~ 70°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TLC2654AIP TLC2654A ADVANCED LINCMOS LOW-NO 1,424 $3.5900 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need TLC2654ACP or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.