TLC251CPG4 Texas Instruments component image

TLC251CPG4

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP GP 1 CIRCUIT 8DIP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

2,231 pcs in stock ships same day before 6pm

from $2.2826

Quantity Unit Price
1 - 249 $2.2826 BEST
250+ $2.2826 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TLC251CPG4?

TLC251CPG4 is a ic opamp gp 1 circuit 8dip, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

7 variants of this series in stock
Part Number Description Stock Unit Price Status
TLC251CPSRG4 IC OPAMP GP 1 CIRCUIT 8SO 622 RFQ In Stock
TLC251CP IC OPAMP GP 1 CIRCUIT 8DIP 1,578 $3.2700 In Stock
TLC251ACDR IC GP OPAMP 1 CIRCUIT 8SOIC 3,447 $1.4700 In Stock
TLC251ACDRG4 IC OPAMP GP 1 CIRCUIT 8SOIC 1,217 RFQ In Stock
TLC251CD IC OPAMP GP 1 CIRCUIT 8SOIC 1,738 $2.9600 In Stock
TLC251CDR IC OPAMP GP 1 CIRCUIT 8SOIC 3,108 $1.6266 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

TLC251CPG4 Specifications

Series LinCMOS™
Package Tube
Part Status Active
Amplifier Type General Purpose
Number of Circuits 1
Output Type -
Slew Rate 5.3V/µs
Gain Bandwidth Product 2.2 MHz
-3db Bandwidth -
Current - Input Bias 0.7 pA
Voltage - Input Offset 1.1 mV
Current - Supply 950µA
Current - Output / Channel -
Voltage - Supply, Single/Dual (±) 1.4V ~ 16V, ±0.7V ~ 8V
Operating Temperature 0°C ~ 70°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TLC252CPG4 IC OPAMP GP 2 CIRCUIT 8DIP 1,216 $4.2249 100%
TLC25M2CP TLC25M2 DUAL LOW-POWER LOW-VOLTA 1,797 $2.8400 100%
TLC25L2CP TLC25L2 DUAL UPOWER LOW-VOLTAGE 1,794 $2.8400 100%
TLC252CP IC OPAMP GP 2 CIRCUIT 8DIP 921 $5.7400 100%
TLC251CP IC OPAMP GP 1 CIRCUIT 8DIP 1,578 $3.2700 100%
ALD1701GPAL IC OPAMP GP 1 CIRCUIT 8DIP 1,216 $4.2214 97%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need TLC251CPG4 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.