TLC071IDGN Texas Instruments component image

TLC071IDGN

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP GP 1 CIRCUIT 8MSOP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

2,833 pcs in stock ships same day before 6pm

from $1.1400

Quantity Unit Price
1 - 479 $1.7900
480+ $1.1400 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TLC071IDGN?

TLC071IDGN is a ic opamp gp 1 circuit 8msop, featuring the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad package, Surface Mount mounting. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Texas Instruments Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
TLC071ID IC OPAMP GP 1 CIRCUIT 8SOIC 2,828 $1.7900 In Stock
TLC073CDGQ IC OPAMP GP 2 CIRCUIT 10MSOP 2,559 $1.9801 In Stock
TLC070IP IC OPAMP GP 1 CIRCUIT 8DIP 2,134 $2.3900 In Stock
TLC070ID IC GP OPAMP 1 CIRCUIT 8SOIC 5,858 $0.8600 In Stock
TLC070CDGNRG4 IC OPAMP GP 1 CIRCUIT 8MSOP 3,703 RFQ In Stock
TLC071CD IC OPAMP GP 1 CIRCUIT 8SOIC 3,035 $1.6700 In Stock
TLC072IDGN IC OPAMP GP 2 CIRCUIT 8MSOP 1,933 $2.6400 In Stock
TLC072IDGNRG4 IC OPAMP GP 2 CIRCUIT 8MSOP 4,347 $1.1590 In Stock
TLC071CDG4 IC OPAMP GP 1 CIRCUIT 8SOIC 5,083 $0.9906 In Stock
TLC072AIDG4 IC OPAMP GP 2 CIRCUIT 8SOIC 2,671 $1.8953 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

TLC071IDGN Specifications

Series -
Package Tube
Part Status Active
Amplifier Type General Purpose
Number of Circuits 1
Output Type -
Slew Rate 19V/µs
Gain Bandwidth Product 10 MHz
-3db Bandwidth -
Current - Input Bias 1.5 pA
Voltage - Input Offset 390 µV
Current - Supply 2.1mA
Current - Output / Channel 57 mA
Voltage - Supply, Single/Dual (±) 4.5V ~ 16V, ±2.25V ~ 8V
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
Supplier Device Package 8-MSOP-PowerPad

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TLC082CDGNR DUAL 16V, 10MHZ, HIGH OUTPUT DRI 4,893 $1.0300 100%
TLC080CDGNR IC OPAMP GP 1 CIRCUIT 8MSOP 2,673 $1.9000 100%
TLC081CDGN IC OPAMP GP 1 CIRCUIT 8MSOP 2,641 $1.9200 100%
TLC071CDGNR TLC071 SINGLE WIDE-BANDWIDTH HIG 7,608 $0.6600 100%
TLC072CDGNR IC OPAMP GP 2 CIRCUIT 8MSOP 2,344 $2.1700 100%
TLC080IDGNR TLC080 SINGLE WIDE-BANDWIDTH HIG 5,300 $0.9500 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need TLC071IDGN or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.