TL072ACN STMicroelectronics component image

TL072ACN

In Stock

STMicroelectronics logo STMicroelectronics · franchised distributor

IC OPAMP JFET 2 CIRCUIT 8DIP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

1,351 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TL072ACN?

TL072ACN is a ic opamp jfet 2 circuit 8dip, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

STMicroelectronics Series Variants in Stock

6 variants of this series in stock
Part Number Description Stock Unit Price Status
TL072BIDT IC OPAMP JFET 2 CIRCUIT 8SO 7,287 $0.6900 In Stock
TL072CDT IC OPAMP JFET 2 CIRCUIT 8SO 11,147 $0.4500 In Stock
TL072IDT IC OPAMP JFET 2 CIRCUIT 8SO 9,839 $0.5100 In Stock
TL072ACDT IC OPAMP JFET 2 CIRCUIT 8SO 7,738 $0.6500 In Stock
TL072BIYDT IC OPAMP JFET 2 CIRCUIT 8SO 5,084 $0.9900 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

TL072ACN Specifications

Series Automotive, AEC-Q100
Package Tube
Part Status Obsolete
Amplifier Type J-FET
Number of Circuits 2
Output Type -
Slew Rate 16V/µs
Gain Bandwidth Product 4 MHz
-3db Bandwidth -
Current - Input Bias 20 pA
Voltage - Input Offset 6 mV
Current - Supply 1.4mA
Current - Output / Channel 40 mA
Voltage - Supply, Single/Dual (±) 6V ~ 36V, ±3V ~ 18V
Operating Temperature 0°C ~ 70°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-DIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TL061IN IC OPAMP JFET 1 CIRCUIT 8DIP 4,395 RFQ 100%
TL072BCN IC OPAMP JFET 2 CIRCUIT 8DIP 2,734 RFQ 100%
TL072BIN IC OPAMP JFET 2 CIRCUIT 8DIP 3,193 RFQ 100%
TL071IN IC OPAMP JFET 1 CIRCUIT 8DIP 4,384 RFQ 100%
TL062IN IC OPAMP JFET 2 CIRCUIT 8DIP 4,253 RFQ 100%
TL072CN IC OPAMP JFET 2 CIRCUIT 8DIP 3,002 RFQ 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

STMicroelectronics Parts in Stock

Request a Quote

Need TL072ACN or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.