THS4501CDR Texas Instruments component image

THS4501CDR

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP DIFF 1 CIRCUIT 8SOIC

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

3,643 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the THS4501CDR?

THS4501CDR is a ic opamp diff 1 circuit 8soic, featuring the 8-SOIC (0.154", 3.90mm Width) package, Surface Mount mounting. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Texas Instruments Series Variants in Stock

28 variants of this series in stock
Part Number Description Stock Unit Price Status
THS4501IDGN IC OPAMP DIFF 1 CIRCUIT 8MSOP 447 $12.0600 In Stock
THS4500IDGKR IC OPAMP DIFF 1 CIRCUIT 8VSSOP 2,078 RFQ In Stock
THS4500IDGKRG4 IC OPAMP DIFF 1 CIRCUIT 8VSSOP 2,188 RFQ In Stock
THS4501CDRG4 IC OPAMP DIFF 1 CIRCUIT 8SOIC 3,665 RFQ In Stock
THS4500CDGKRG4 IC OPAMP DIFF 1 CIRCUIT 8VSSOP 4,622 RFQ In Stock
THS4501CDGKG4 IC OPAMP DIFF 1 CIRCUIT 8VSSOP 4,722 RFQ In Stock
THS4500IDGNR IC OPAMP DIFF 1 CIRCUIT 8MSOP 793 $6.6533 In Stock
THS4500IDGNRG4 IC OPAMP DIFF 1 CIRCUIT 8MSOP 782 $6.6533 In Stock
THS4500IDGNG4 IC OPAMP DIFF 1 CIRCUIT 8MSOP 591 $9.0189 In Stock
THS4501IDGKRG4 IC OPAMP DIFF 1 CIRCUIT 8VSSOP 2,847 RFQ In Stock
+ 18 more variants in stock — browse the full category

Technical Parameters

THS4501CDR Specifications

Series -
Package Tape & Reel (TR)
Part Status Obsolete
Amplifier Type Differential
Number of Circuits 1
Output Type Differential
Slew Rate 2800V/µs
Gain Bandwidth Product 300 MHz
-3db Bandwidth 370 MHz
Current - Input Bias 4 µA
Voltage - Input Offset 4 mV
Current - Supply 23mA
Current - Output / Channel -
Voltage - Supply, Single/Dual (±) 4.5V ~ 15V, ±2.25V ~ 7.5V
Operating Temperature 0°C ~ 70°C
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOIC

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
THS4501IDR THS4501 HIGH-SPEED FULLY DIFFERE 879 $5.9000 100%
THS4500CD THS4500 15V, HIGH-SPEED FULLY D 736 $7.0800 100%
THS4503CDG4 THS4503 HIGH-SPEED FULLY-DIFFERE 694 $7.7500 100%
THS4500ID THS4500 15V, HIGH-SPEED FULLY D 746 $7.0800 100%
THS4503CD IC OPAMP DIFF 1 CIRCUIT 8SOIC 468 $11.6500 100%
THS4500IDRG4 IC OPAMP DIFF 1 CIRCUIT 8SOIC 1,688 RFQ 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need THS4501CDR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.