THS4211DGN Texas Instruments component image

THS4211DGN

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP VFB 1 CIRCUIT 8MSOP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

762 pcs in stock ships same day before 6pm

from $3.8311

Quantity Unit Price
1 - 9 $6.9000
10 - 79 $6.2432
80 - 159 $5.9594
160 - 559 $5.1932
560 - 1,039 $4.5405
1,040 - 2,559 $3.9730
2,560+ $3.8311 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the THS4211DGN?

THS4211DGN is a ic opamp vfb 1 circuit 8msop, featuring the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

16 variants of this series in stock
Part Number Description Stock Unit Price Status
THS4211DRBR IC OPAMP VFB 1 CIRCUIT 8SON 1,351 $3.8059 In Stock
THS4215DGNRG4 IC OPAMP VFB 1 CIRCUIT 8MSOP 3,335 RFQ In Stock
THS4215DRBR IC OPAMP VFB 1 CIRCUIT 8SON 1,665 $3.0922 In Stock
THS4211DGKRG4 IC OPAMP VFB 1 CIRCUIT 8VSSOP 4,965 RFQ In Stock
THS4211DRBTG4 IC OPAMP VFB 1 CIRCUIT 8SON 1,106 $4.7248 In Stock
THS4211DRG4 IC VOLTAGE FEEDBACK 1 CIRC 8SOIC 1,745 $2.9300 In Stock
THS4211DGNRG4 IC OPAMP VFB 1 CIRCUIT 8MSOP 1,355 $3.8059 In Stock
THS4211DGKR IC OPAMP VFB 1 CIRCUIT 8VSSOP 2,142 RFQ In Stock
THS4215DRBT IC OPAMP VFB 1 CIRCUIT 8SON 790 $6.6100 In Stock
THS4215DGN IC OPAMP VFB 1 CIRCUIT 8MSOP 774 $6.9000 In Stock
+ 6 more variants in stock — browse the full category

Technical Parameters

THS4211DGN Specifications

Series -
Package Tube
Part Status Active
Amplifier Type Voltage Feedback
Number of Circuits 1
Output Type -
Slew Rate 970V/µs
Gain Bandwidth Product 350 MHz
-3db Bandwidth 325 MHz
Current - Input Bias 7 µA
Voltage - Input Offset 3 mV
Current - Supply 19mA
Current - Output / Channel 220 mA
Voltage - Supply, Single/Dual (±) 5V ~ 15V, ±2.5V ~ 7.5V
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
Supplier Device Package 8-MSOP-PowerPad

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
THS4215DGN IC OPAMP VFB 1 CIRCUIT 8MSOP 774 $6.9000 100%
THS4275DGN THS4275 SUPER-FAST ULTRA-LOW DIS 1,292 $4.0000 100%
THS4211DGNRG4 IC OPAMP VFB 1 CIRCUIT 8MSOP 1,355 $3.8059 100%
THS4211DGNR THS4211 ULTRA-LOW-DISTORTION, HI 1,517 $3.3800 100%
THS4271DGN THS4271 SUPER-FAST ULTRA-LOW DIS 1,290 $4.0000 100%
THS4271DGNR IC OPAMP VFB 1 CIRCUIT 8MSOP 1,363 $3.7575 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need THS4211DGN or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.