THS4130CDGNRG4 Texas Instruments component image

THS4130CDGNRG4

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP DIFF 1 CIRCUIT 8MSOP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

987 pcs in stock ships same day before 6pm

from $5.0641

Quantity Unit Price
1 - 2,499 $5.2588
2,500+ $5.0641 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the THS4130CDGNRG4?

THS4130CDGNRG4 is a ic opamp diff 1 circuit 8msop, featuring the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

36 variants of this series in stock
Part Number Description Stock Unit Price Status
THS4131CDGKG4 IC OPAMP DIFF 1 CIRCUIT 8VSSOP 785 $6.6321 In Stock
THS4131IDR IC OPAMP DIFF 1 CIRCUIT 8SOIC 1,033 $5.0384 In Stock
THS4130IDRG4 IC OPAMP DIFF 1 CIRCUIT 8SOIC 1,027 $5.1119 In Stock
THS4131CDGK IC OPAMP DIFF 1 CIRCUIT 8VSSOP 607 $8.8700 In Stock
THS4131CDGN IC OPAMP DIFF 1 CIRCUIT 8MSOP 568 $9.3100 In Stock
THS4131CDGNRG4 IC OPAMP DIFF 1 CIRCUIT 8MSOP 1,003 $5.1854 In Stock
THS4131IDG4 IC OPAMP DIFF 1 CIRCUIT 8SOIC 638 $8.4660 In Stock
THS4131IDGNR IC OPAMP DIFF 1 CIRCUIT 8MSOP 654 $8.0600 In Stock
THS4130IDGKR IC OPAMP DIFF 1 CIRCUIT 8VSSOP 1,009 $5.1119 In Stock
THS4130CDG4 IC OPAMP DIFF 1 CIRCUIT 8SOIC 677 $7.7337 In Stock
+ 26 more variants in stock — browse the full category

Technical Parameters

THS4130CDGNRG4 Specifications

Series -
Package Tape & Reel (TR)
Part Status Active
Amplifier Type Differential
Number of Circuits 1
Output Type Differential
Slew Rate 52V/µs
Gain Bandwidth Product 225 MHz
-3db Bandwidth 150 MHz
Current - Input Bias 2 µA
Voltage - Input Offset 200 µV
Current - Supply 14mA
Current - Output / Channel 85 mA
Voltage - Supply, Single/Dual (±) 5V ~ 30V, ±2.5V ~ 15V
Operating Temperature 0°C ~ 70°C
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
Supplier Device Package 8-MSOP-PowerPad

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
THS4130CDGN IC OPAMP DIFF 1 CIRCUIT 8MSOP 562 $9.4200 100%
THS4130CDGNR IC OPAMP DIFF 1 CIRCUIT 8MSOP 668 $7.9400 100%
THS4130IDGNR IC OPAMP DIFF 1 CIRCUIT 8MSOP 647 $8.1700 94%
THS4131IDGN IC OPAMP DIFF 1 CIRCUIT 8MSOP 572 $9.5300 94%
THS4130IDGNRG4 IC OPAMP DIFF 1 CIRCUIT 8MSOP 963 $5.4058 94%
THS4131CDGNG4 IC OPAMP DIFF 1 CIRCUIT 8MSOP 758 $6.9641 94%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need THS4130CDGNRG4 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.