THS4121CDRG4 Texas Instruments component image

THS4121CDRG4

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP DIFF 1 CIRCUIT 8SOIC

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

2,699 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the THS4121CDRG4?

THS4121CDRG4 is a ic opamp diff 1 circuit 8soic, featuring the 8-SOIC (0.154", 3.90mm Width) package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

17 variants of this series in stock
Part Number Description Stock Unit Price Status
THS4121IDGKRG4 IC OPAMP DIFF 1 CIRCUIT 8VSSOP 1,522 $3.3951 In Stock
THS4120CDGKRG4 IC OPAMP DIFF 1 CIRCUIT 8VSSOP 3,895 RFQ In Stock
THS4121CDR IC OPAMP DIFF 1 CIRCUIT 8SOIC 2,272 RFQ In Stock
THS4120IDGKR IC OPAMP DIFF 1 CIRCUIT 8VSSOP 4,816 RFQ In Stock
THS4121CDGKR IC OPAMP DIFF 1 CIRCUIT 8VSSOP 1,584 $3.2331 In Stock
THS4120CDGNRG4 IC OPAMP DIFF 1 CIRCUIT 8MSOP 4,883 RFQ In Stock
THS4120CDGKR IC OPAMP DIFF 1 CIRCUIT 8VSSOP 2,380 RFQ In Stock
THS4120IDGKRG4 IC OPAMP DIFF 1 CIRCUIT 8VSSOP 758 RFQ In Stock
THS4120CDGK IC OPAMP DIFF 1 CIRCUIT 8VSSOP 3,814 RFQ In Stock
THS4120CDGKG4 IC OPAMP DIFF 1 CIRCUIT 8VSSOP 4,087 RFQ In Stock
+ 7 more variants in stock — browse the full category

Technical Parameters

THS4121CDRG4 Specifications

Series -
Package Tape & Reel (TR)
Part Status Obsolete
Amplifier Type Differential
Number of Circuits 1
Output Type Differential
Slew Rate 55V/µs
Gain Bandwidth Product -
-3db Bandwidth 100 MHz
Current - Input Bias 1.2 pA
Voltage - Input Offset 3 mV
Current - Supply 11mA
Current - Output / Channel 100 mA
Voltage - Supply, Single/Dual (±) 3V ~ 3.5V, ±1.5V ~ 1.75V
Operating Temperature 0°C ~ 70°C
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOIC

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
THS4120IDR THS4120 3.3 V, 100 MHZ, 43 V/US, 1,709 $3.0100 100%
THS4120ID THS4120 3.3 V, 100 MHZ, 43 V/US, 1,437 $3.5900 100%
THS4121CD IC OPAMP DIFF 1 CIRCUIT 8SOIC 802 $6.5300 100%
MCP6007-E/SN DUAL, 1MHZ OP AMP, E TEMP 16,706 $0.3000 97%
OPA364AID OPA364 1.8V, HIGH CMR, RRIO OP A 4,756 $1.0600 97%
LMV932Q1MA/NOPB LMV932-N-Q1 AUTOMOTIVE, DUAL 1.8 4,900 $1.0300 97%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need THS4121CDRG4 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.