THS4012CDGNR Texas Instruments component image

THS4012CDGNR

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP VFB 2 CIRCUIT 8MSOP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

707 pcs in stock ships same day before 6pm

from $3.9234

Quantity Unit Price
1 - 2,499 $7.6100
2,500+ $3.9234 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the THS4012CDGNR?

THS4012CDGNR is a ic opamp vfb 2 circuit 8msop, featuring the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

19 variants of this series in stock
Part Number Description Stock Unit Price Status
THS4011IDRG4 IC OPAMP VFB 1 CIRCUIT 8SOIC 3,124 RFQ In Stock
THS4011IDGNRG4 IC OPAMP VFB 1 CIRCUIT 8MSOP 1,534 $3.3684 In Stock
THS4012CDG4 IC OPAMP VFB 2 CIRCUIT 8SOIC 709 $7.4121 In Stock
THS4011IDGNR IC OPAMP VFB 1 CIRCUIT 8MSOP 969 $5.3500 In Stock
THS4012ID IC OPAMP VFB 2 CIRCUIT 8SOIC 595 $8.8400 In Stock
THS4011ID IC OPAMP VFB 1 CIRCUIT 8SOIC 848 $6.1500 In Stock
THS4011CD IC OPAMP VFB 1 CIRCUIT 8SOIC 889 $5.9000 In Stock
THS4011CDGNG4 IC OPAMP VFB 1 CIRCUIT 8MSOP 1,111 $4.7066 In Stock
THS4012IDGNR IC OPAMP VFB 2 CIRCUIT 8MSOP 680 $7.8500 In Stock
THS4011CDGNR IC OPAMP VFB 1 CIRCUIT 8MSOP 967 $5.4100 In Stock
+ 9 more variants in stock — browse the full category

Technical Parameters

THS4012CDGNR Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Amplifier Type Voltage Feedback
Number of Circuits 2
Output Type -
Slew Rate 310V/µs
Gain Bandwidth Product 290 MHz
-3db Bandwidth 290 MHz
Current - Input Bias 2 µA
Voltage - Input Offset 1 mV
Current - Supply 7.8mA
Current - Output / Channel 110 mA
Voltage - Supply, Single/Dual (±) 9V ~ 32V, ±4.5V ~ 16V
Operating Temperature 0°C ~ 70°C
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
Supplier Device Package 8-MSOP-PowerPad

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
THS4062IDGNR THS4062 180-MHZ HIGH OUTPUT DRIV 1,641 $3.1400 100%
THS4012IDGNR IC OPAMP VFB 2 CIRCUIT 8MSOP 680 $7.8500 100%
THS4011CDGNR IC OPAMP VFB 1 CIRCUIT 8MSOP 967 $5.4100 100%
THS4011CDGNG4 IC OPAMP VFB 1 CIRCUIT 8MSOP 1,111 $4.7066 100%
THS4011CDGNRG4 IC OPAMP VFB 1 CIRCUIT 8MSOP 1,597 $3.2181 100%
THS4051CDGN THS4051 70-MHZ LOW-COST VOLTAGE- 2,677 $1.9000 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need THS4012CDGNR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.