THS3062DGNRG4 Texas Instruments component image

THS3062DGNRG4

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP CFA 2 CIRCUIT 8MSOP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

2,873 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the THS3062DGNRG4?

THS3062DGNRG4 is a ic opamp cfa 2 circuit 8msop, featuring the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

11 variants of this series in stock
Part Number Description Stock Unit Price Status
THS3062DDA IC OPAMP CFA 2 CIRCUIT 8SOPWRPAD 389 $14.1600 In Stock
THS3062DGN IC OPAMP CFA 2 CIRCUIT 8MSOP 388 $14.1600 In Stock
THS3061DGN IC OPAMP CFA 1 CIRCUIT 8MSOP 480 $11.1300 In Stock
THS3062DDARG3 IC OPAMP CFA 2 CIRCUIT 8SOPWRPAD 4,991 RFQ In Stock
THS3061DGNRG4 IC OPAMP CFA 1 CIRCUIT 8MSOP 837 $6.2324 In Stock
THS3062DDAG3 IC OPAMP CFA 2 CIRCUIT 8SOPWRPAD 449 $12.4720 In Stock
THS3062DGNR IC OPAMP CFA 2 CIRCUIT 8MSOP 1,576 RFQ In Stock
THS3062D IC OPAMP CFA 2 CIRCUIT 8SOIC 403 $14.1600 In Stock
THS3061D IC OPAMP CFA 1 CIRCUIT 8SOIC 479 $11.1300 In Stock
THS3062DDAR IC OPAMP CFA 2 CIRCUIT 8SOPWRPAD 4,905 RFQ In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

THS3062DGNRG4 Specifications

Series -
Package Tape & Reel (TR)
Part Status Obsolete
Amplifier Type Current Feedback
Number of Circuits 2
Output Type -
Slew Rate 7000V/µs
Gain Bandwidth Product 2.2 GHz
-3db Bandwidth 300 MHz
Current - Input Bias 6 µA
Voltage - Input Offset 700 µV
Current - Supply 8.3mA
Current - Output / Channel 145 mA
Voltage - Supply, Single/Dual (±) 10V ~ 30V, ±5V ~ 15V
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
Supplier Device Package 8-MSOP-PowerPad

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
THS3062DGNG4 THS3062 DUAL, HIGH-VOLTAGE, HIGH 561 $9.4200 100%
THS3061DGNR THS3061 SINGLE, HIGH-VOLTAGE, HI 935 $5.5300 100%
THS3061DGNRG4 IC OPAMP CFA 1 CIRCUIT 8MSOP 837 $6.2324 100%
THS3061DGN IC OPAMP CFA 1 CIRCUIT 8MSOP 480 $11.1300 100%
THS3062DGN IC OPAMP CFA 2 CIRCUIT 8MSOP 388 $14.1600 100%
THS3062DGNR IC OPAMP CFA 2 CIRCUIT 8MSOP 1,576 RFQ 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need THS3062DGNRG4 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.