TEH140MR040FE Ohmite component image

TEH140MR040FE

In Stock

Ohmite logo Ohmite · franchised distributor

RES 40M OHM 1% 140W TO247-2

Listed in Through Hole Resistors

372 pcs in stock ships same day before 6pm

from $9.1221

Quantity Unit Price
1 - 24 $15.4900
25 - 99 $12.6771
100 - 999 $10.0360
1,000+ $9.1221 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TEH140MR040FE?

TEH140MR040FE is a res 40m ohm 1% 140w to247-2, featuring a power rating of 140W, a tolerance of ±1%, a Thick Film composition, and the TO-247-2 case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

24 variants of this series in stock
Part Number Description Stock Unit Price Status
TEH140M470RFE RES 470 OHM 1% 140W TO247-2 377 $15.2000 In Stock
TEH140M100RFE RES 100 OHM 1% 140W TO247-2 364 $15.2000 In Stock
TEH140M75R0FE RES 75 OHM 1% 140W TO247-2 378 $15.2000 In Stock
TEH140M20R0FE RES 20 OHM 1% 140W TO247-2 362 $15.2000 In Stock
TEH140M270RFE RES 270 OHM 1% 140W TO247-2 375 $15.2000 In Stock
TEH140M330RFE RES 330 OHM 1% 140W TO247-2 369 $15.2000 In Stock
TEH140M10K0FE RES 10K OHM 1% 140W TO247-2 364 $15.2000 In Stock
TEH140M2R00FE RES 2 OHM 1% 140W TO247-2 365 $15.4900 In Stock
TEH140M5R00FE RES 5 OHM 1% 140W TO247-2 360 $15.2000 In Stock
TEH140M12R0FE RES 12 OHM 1% 140W TO247-2 356 $15.8900 In Stock
+ 14 more variants in stock — browse the full category

Technical Parameters

TEH140MR040FE Specifications

Series TEH140
Package Tube
Part Status Active
Resistance 40 mOhms
Tolerance ±1%
Power (Watts) 140W
Composition Thick Film
Features Non-Inductive, Pulse Withstanding
Temperature Coefficient 250ppm/°C
Operating Temperature -55°C ~ 175°C
Package / Case TO-247-2
Supplier Device Package TO-247
Size / Dimension 0.630" L x 0.189" W (16.00mm x 4.80mm)
Height - Seated (Max) 0.925" (23.50mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TEH140MR050FE RES 50M OHM 1% 140W TO247-2 356 $15.8300 87%
TEH140MR030FE RES 30M OHM 1% 140W TO247-2 371 $15.4900 83%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need TEH140MR040FE or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.