TA050PY10R0JE Ohmite component image

TA050PY10R0JE

In Stock

Ohmite logo Ohmite · franchised distributor

POWER CHIP 50 WATT

Listed in Through Hole Resistors

896 pcs in stock ships same day before 6pm

from $5.8286

Quantity Unit Price
1+ $5.8286 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TA050PY10R0JE?

TA050PY10R0JE is a power chip 50 watt, featuring a power rating of 50W, a tolerance of ±5%, a Thick Film composition, and the Radial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

40 variants of this series in stock
Part Number Description Stock Unit Price Status
TA305PA68K0JE POWER CHIP 5 WATT 4,136 $1.2200 In Stock
TA025PW1R00K POWERCHIP 25WAT 1 OHM 10% 1,527 $3.3672 In Stock
TA025PW4R00JE POWER CHIP 25 WATT 1,495 $3.4238 In Stock
TA810PA5K00J 10W POWER CHIP 2,703 $1.8704 In Stock
TA205PA11R0JE POWER CHIP 5 WATTS 2,173 $2.3540 In Stock
TA310PA47R0JE POWER CHIP 10 WATT 1,863 $2.7568 In Stock
TA025PW1R00JE POWER CHIP 25 WATT 5% 1,277 $4.0320 In Stock
TA310PA20K0JE POWER CHIP 10 WATT 2,214 $2.2984 In Stock
TA810PA50R0J 10W POWER CHIP 2,711 $1.8706 In Stock
TA805PB1K50K 5W POWER CHIP 3,224 $1.5735 In Stock
+ 30 more variants in stock — browse the full category

Technical Parameters

TA050PY10R0JE Specifications

Series TA
Package Bulk
Part Status Active
Resistance 10 Ohms
Tolerance ±5%
Power (Watts) 50W
Composition Thick Film
Features -
Temperature Coefficient ±100ppm/°C
Operating Temperature -55°C ~ 180°C
Package / Case Radial
Supplier Device Package Powerchip®
Size / Dimension 2.220" L x 0.240" W (56.39mm x 6.10mm)
Height - Seated (Max) 2.288" (58.11mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need TA050PY10R0JE or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.