T110C396K020AS KEMET component image

T110C396K020AS

In Stock

KEMET logo KEMET · franchised distributor

CAP TANT 39UF 10% 20V AXIAL

Listed in Tantalum Capacitors

858 pcs in stock ships same day before 6pm

from $6.1865

Quantity Unit Price
1+ $6.1865 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the T110C396K020AS?

T110C396K020AS is a cap tant 39uf 10% 20v axial, featuring a capacitance of 39 µF, a rated voltage of 20 V, a tolerance of ±10%, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

KEMET Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CWR29MC335JCFC CAP TANT 3.3UF 5% 35V 2214 136 $54.3543 In Stock
TBJD107K010LSSB0023 CAP TANT 100UF 10% 10V 2917 847 $6.1944 In Stock
M39003/01-6073 CAP TANT 2.2UF 10% 20V AXIAL 800 $6.6300 In Stock
M39003/01-6043 CAP TANT 220UF 10% 10V AXIAL 202 $32.7700 In Stock
M39003/01-6048 CAP TANT 3.3UF 10% 15V AXIAL 1,093 $4.7168 In Stock
150D126X5035R2TE3 CAP TANT 12UF 5% 35V AXIAL 848 $6.1710 In Stock
M39003/01-6199 CAP TANT 1.5UF 10% 50V AXIAL 456 $11.7100 In Stock
M39003/01-6032 CAP TANT 39UF 10% 10V AXIAL 473 $11.3100 In Stock
M39003/01-6036 CAP TANT 100UF 10% 10V AXIAL 285 $20.7000 In Stock
T97R156K050LSA CAP TANT 15UF 10% 50V 3024 843 $6.1952 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

T110C396K020AS Specifications

Series Military, MIL-PRF-39003/1, CSR13
Package Tray
Part Status Active
Capacitance 39 µF
Tolerance ±10%
Voltage - Rated 20 V
Type Hermetically Sealed
ESR (Equivalent Series Resistance) 1.4Ohm @ 100kHz
Operating Temperature -55°C ~ 125°C
Lifetime @ Temp. -
Mounting Type Through Hole
Package / Case Axial
Size / Dimension 0.289" Dia x 0.289" L (7.34mm x 7.34mm)
Height - Seated (Max) -
Lead Spacing -
Manufacturer Size Code C
Ratings -
Features General Purpose
Failure Rate -

Buying Guide

Choosing Capacitors

Selecting a capacitor means matching the dielectric to the job: Class 1 ceramics (C0G/NP0) for timing, RF and precision filtering; Class 2 (X7R/X5R) for decoupling where value drift is tolerable; aluminum electrolytic or polymer for bulk storage; film for AC line and precision analog; tantalum/niobium where stable capacitance in a small footprint matters most. Order of checks: capacitance at operating voltage (MLCCs lose 30–60% of nominal value near rated voltage — derate to 50–80%), temperature range vs dielectric code (X7R = −55~+125°C), tolerance, and ripple current rating in power paths. For switching regulators, verify the ESR window the controller expects. In decoupling banks, mix a bulk MLCC with a small 100 nF per device pin for broadband impedance.

Same Manufacturer

KEMET Parts in Stock

Request a Quote

Need T110C396K020AS or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.