SX1272LM1CEP Semtech component image

SX1272LM1CEP

In Stock

Semtech logo Semtech · franchised distributor

NAMOTE-72 - 915MHZ W/O SMA

Listed in RF Receiver, Transmitter, and Transceiver Finished Units

52 pcs in stock ships same day before 6pm

from $288.5456

Quantity Unit Price
1 - 9 $330.0000
10+ $288.5456 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the SX1272LM1CEP?

SX1272LM1CEP is a namote-72 - 915mhz w/o sma, featuring a frequency of 860MHz ~ 1.02GHz. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Semtech Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
SC1116ISKTRT IC REG CTRLR DDR 1OUT SOT23-6 1,907 RFQ In Stock
GS4900BCNE3 IC CLK FREQ GEN VID GENLOCK 485 $11.3039 In Stock
GS4901BCNE3 IC CLK FREQ GEN VID GENLOCK 295 $19.3816 In Stock
SX8651ICSTRT IC SCREEN CNTRL 12BIT 12WLCSP 1,768 $2.8800 In Stock
SX8651IWLTRT IC SCREEN CNTRL 12BIT 12DFN 1,787 $2.8500 In Stock
SX1272DVK1BAS SX1272 868MHZ DEVELOPMENT KIT 58 $598.8000 In Stock
SX1272DVK1CAS SX1272 915MHZ DEVELOPMENT KIT 48 $598.8000 In Stock
SX1280DVK1ZHP SX1280 2.4GHZ DEVELOPMENT KIT 44 $478.8000 In Stock
SX1232-32SKA868 KIT EVALUATION SX1232 868MHZ 72 $187.5000 In Stock
SX1232-32SKA915 KIT EVALUATION SX1232 915MHZ 73 $187.5000 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

SX1272LM1CEP Specifications

Series -
Package Box
Part Status Active
Function Transceiver
Modulation or Protocol -
Frequency 860MHz ~ 1.02GHz
Applications -
Interface SPI
Sensitivity -137dBm
Power - Output 20dBm
Data Rate (Max) 300kbps
Features -

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Semtech Parts in Stock

Request a Quote

Need SX1272LM1CEP or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.