SS133DHS MITEQ, Inc.(L3 Narda-MITEQ) component image

SS133DHS

In Stock

MITEQ, Inc.(L3 Narda-MITEQ) logo MITEQ, Inc.(L3 Narda-MITEQ) · franchised distributor

PIN SWITCH SP3T 2-18 GHZ

Listed in RF Switches

43 pcs in stock ships same day before 6pm

from $3,819.0000

Quantity Unit Price
1+ $3,819.0000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the SS133DHS?

SS133DHS is a pin switch sp3t 2-18 ghz, featuring an insertion loss of 3dB (max), the Module, SMA Connectors case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

MITEQ, Inc.(L3 Narda-MITEQ) Series Variants in Stock

11 variants of this series in stock
Part Number Description Stock Unit Price Status
SS133BDHTS PIN SWITCH SP3T 2-18 GHZ 37 $4,006.5000 In Stock
SS142DHS PIN SWITCH SP4T .5-18 GHZ 45 $4,401.0000 In Stock
SS142DHTS PIN SWITCH SP4T .5-18 GHZ 44 $4,930.5000 In Stock
SS123BDHTS PIN SWITCH SP2T 2-18 GHZ 46 $3,048.0000 In Stock
SS163DHS PIN SWITCH SP6T 2-18 GHZ 31 $6,210.0000 In Stock
SS123DHS PIN SWITCH SP2T 2-18 GHZ 47 $2,931.0000 In Stock
SS122DHS PIN SWITCH SP2T .5-18 GHZ 42 $3,114.0000 In Stock
SS122DHTS-80 PIN SWITCH SP2T .5-18 GHZ 45 $3,546.0000 In Stock
SS212DHTS-80 PIN SWITCH SPST .5-18 GHZ 35 $2,833.5000 In Stock
SS213BDHTS PIN SWITCH SPST 2-18 GHZ 41 $2,620.5000 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

SS133DHS Specifications

Series Super-Slim
Package Box
Part Status Active
RF Type General Purpose
Topology Reflective
Circuit SP3T
Frequency Range 2GHz ~ 18GHz
Isolation 60dB (min)
Insertion Loss 3dB (max)
Test Frequency 12GHz ~ 18GHz
P1dB -
IIP3 -
Features -
Impedance -
Voltage - Supply -
Operating Temperature -54°C ~ 95°C
Package / Case Module, SMA Connectors
Supplier Device Package Module

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
SP143DHS PIN SWITCH SP4T 2-18 GHZ 49 $4,068.0000 100%
SW1-020180AN1HM SWITCH 2,110 RFQ 91%
S538A SWITCH 1,996 RFQ 91%
SW1-020180RN1NF SWITCH 819 RFQ 91%
SW3-020180RN1NM SWITCH 3,703 RFQ 91%
S138BU SWITCH 745 RFQ 91%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

MITEQ, Inc.(L3 Narda-MITEQ) Parts in Stock

Request a Quote

Need SS133DHS or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.