SR731ETTP2R40F KOA Speer Electronics, Inc. component image

SR731ETTP2R40F

In Stock

KOA Speer Electronics, Inc. logo KOA Speer Electronics, Inc. · franchised distributor

CURRENT SENSE RESISTOR

Listed in Chip Resistor - Surface Mount

44,277 pcs in stock ships same day before 6pm

from $0.1131

Quantity Unit Price
1+ $0.1131 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the SR731ETTP2R40F?

SR731ETTP2R40F is a current sense resistor, featuring a power rating of 0.167W, 1/6W, a tolerance of ±1%, a Thick Film composition, and the 0402 (1005 Metric) case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

KOA Speer Electronics, Inc. Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
SR732BTTDR240D CURRENT SENSE RESISTOR 31,895 $0.1569 In Stock
SR73W3ATTER300F CURRENT SENSE RESISTOR 19,126 $0.2620 In Stock
SR732ATTDR174F CURRENT SENSE RESISTOR 44,277 $0.1131 In Stock
SR73W3ATTER182F CURRENT SENSE RESISTOR 19,130 $0.2620 In Stock
SR732ETTD4R7G CURRENT SENSE RESISTOR 42,284 $0.1184 In Stock
SR733ATTER365F CURRENT SENSE RESISTOR 19,127 $0.2620 In Stock
SR731JTTD3R01F CURRENT SENSE RESISTOR 67,372 $0.0743 In Stock
SR732ATTD9R53D CURRENT SENSE RESISTOR 44,275 $0.1131 In Stock
SR732HTTER11G CURRENT SENSE RESISTOR 26,331 $0.1902 In Stock
SR733ATTER220F CURRENT SENSE RESISTOR 19,121 $0.2620 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

SR731ETTP2R40F Specifications

Series SR73
Package Tape & Reel (TR)
Part Status Active
Resistance 2.4 Ohms
Tolerance ±1%
Power (Watts) 0.167W, 1/6W
Composition Thick Film
Features Automotive AEC-Q200, Current Sense, Moisture Resistant
Temperature Coefficient ±200ppm/°C
Operating Temperature -55°C ~ 150°C
Package / Case 0402 (1005 Metric)
Supplier Device Package 0402
Ratings AEC-Q200
Size / Dimension 0.039" L x 0.020" W (1.00mm x 0.50mm)
Height - Seated (Max) 0.016" (0.40mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
SG73P1ETTP2R40F RES 2.4 OHM 1% 1/8W 0402 295,731 $0.0169 100%
SR731ERTTP2R40F RES 2.4 OHM 1% 1/6W 0402 6,888 $0.7300 100%
RMCF0402FT2R40 RES 2.4 OHM 1% 1/16W 0402 50,030 $0.1000 100%
RCS1005F2R37CS RES 2.37 OHM 1% 1/16W 0402 1,366,150 $0.0037 99%
ERJ-S02F2R37X RES 2.37 OHM 1% 1/10W 0402 SMD 96,612 $0.0518 99%
CR202R37F RES SMD 2.37 OHM 1% 1/16W 0402 2,809,027 $0.0018 99%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

KOA Speer Electronics, Inc. Parts in Stock

Request a Quote

Need SR731ETTP2R40F or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.