SQPW78R2J TE Connectivity AMP Connectors component image

SQPW78R2J

In Stock

TE Connectivity AMP Connectors logo TE Connectivity AMP Connectors · franchised distributor

RES 8.20 OHM 7W 5% AXIAL

Listed in Through Hole Resistors

8,802 pcs in stock ships same day before 6pm

from $0.1768

Quantity Unit Price
1 - 9 $0.5700
10 - 24 $0.4760
25 - 49 $0.4080
50 - 99 $0.3672
100 - 249 $0.3196
250 - 499 $0.2856
500 - 999 $0.2312
1,000 - 4,999 $0.1870
5,000+ $0.1768 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the SQPW78R2J?

SQPW78R2J is a res 8.20 ohm 7w 5% axial, featuring a power rating of 7W, a tolerance of ±5%, a Wirewound composition, and the Axial case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

TE Connectivity AMP Connectors Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
SQMW51R0J RES 1.00 OHM 5W 5% RADIAL 8,242 $0.6100 In Stock
SQMW568RJ RES 68.0 OHM 5W 5% RADIAL 8,238 $0.6100 In Stock
SQMR747KJ RES 47.0K OHM 7W 5% RADIAL 7,283 $0.6900 In Stock
SQMR5330RF RES 330 OHM 5W 1% RADIAL 4,380 RFQ In Stock
SQMR568KJ RES 68.0K OHM 5W 5% RADIAL 8,227 $0.6100 In Stock
SQPW5R022J RES 0.022 OHM 5W 5% AXIAL 7,393 $0.6800 In Stock
SQPR52K2J RES 2.20K OHM 5W 5% AXIAL 7,860 $0.6400 In Stock
SQMW71R0J RES 1.00 OHM 7W 5% RADIAL 7,288 $0.6900 In Stock
SQPW733RJ RES 33.0 OHM 7W 5% AXIAL 8,810 $0.5700 In Stock
SQPW2R047J RES 0.047 OHM 2W 5% AXIAL 8,109 $0.6200 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

SQPW78R2J Specifications

Series SQ, CGS
Package Bulk
Part Status Active
Resistance 8.2 Ohms
Tolerance ±5%
Power (Watts) 7W
Composition Wirewound
Features Flame Proof, Moisture Resistant, Safety
Temperature Coefficient ±300ppm/°C
Operating Temperature -55°C ~ 250°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.394" x 0.354" Rectangular x 1.378" L (10.00mm x 9.00mm x 35.00mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CP00058R200JE143 RES 8.2 OHM 5W 5% AXIAL 547 $10.0000 84%
5W8D2 5W 8.2 OHM 5% 8,974 $0.5600 84%
10W8D2 10W 8.2 OHMS 5% 8,109 $0.6200 83%
PNP400JR-73-8R2 RES WW 4W 5% AXIAL 46,142 $0.1085 73%
CP00058R200KB14 RES 8.2 OHM 5W 10% AXIAL 547 $10.0000 68%
CP00108R200KB14 RES 8.2 OHM 10W 10% AXIAL 297 $19.0000 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

TE Connectivity AMP Connectors Parts in Stock

Request a Quote

Need SQPW78R2J or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.