SQMW52R2J TE Connectivity AMP Connectors component image

SQMW52R2J

In Stock

TE Connectivity AMP Connectors logo TE Connectivity AMP Connectors · franchised distributor

RES 2.20 OHM 5W 5% RADIAL

Listed in Through Hole Resistors

8,238 pcs in stock ships same day before 6pm

from $0.1878

Quantity Unit Price
1 - 9 $0.6100
10 - 24 $0.5060
25 - 49 $0.4332
50 - 99 $0.3900
100 - 249 $0.3395
250 - 499 $0.3034
500 - 999 $0.2456
1,000 - 4,999 $0.1986
5,000+ $0.1878 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the SQMW52R2J?

SQMW52R2J is a res 2.20 ohm 5w 5% radial, featuring a power rating of 5W, a tolerance of ±5%, a Wirewound composition, and the Radial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

TE Connectivity AMP Connectors Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
SQMW51R0J RES 1.00 OHM 5W 5% RADIAL 8,242 $0.6100 In Stock
SQMW568RJ RES 68.0 OHM 5W 5% RADIAL 8,238 $0.6100 In Stock
SQMR747KJ RES 47.0K OHM 7W 5% RADIAL 7,283 $0.6900 In Stock
SQMR5330RF RES 330 OHM 5W 1% RADIAL 4,380 RFQ In Stock
SQMR568KJ RES 68.0K OHM 5W 5% RADIAL 8,227 $0.6100 In Stock
SQPW5R022J RES 0.022 OHM 5W 5% AXIAL 7,393 $0.6800 In Stock
SQPR52K2J RES 2.20K OHM 5W 5% AXIAL 7,860 $0.6400 In Stock
SQMW71R0J RES 1.00 OHM 7W 5% RADIAL 7,288 $0.6900 In Stock
SQPW733RJ RES 33.0 OHM 7W 5% AXIAL 8,810 $0.5700 In Stock
SQPW2R047J RES 0.047 OHM 2W 5% AXIAL 8,109 $0.6200 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

SQMW52R2J Specifications

Series SQ, CGS
Package Bulk
Part Status Active
Resistance 2.2 Ohms
Tolerance ±5%
Power (Watts) 5W
Composition Wirewound
Features Flame Proof, Moisture Resistant, Safety
Temperature Coefficient ±300ppm/°C
Operating Temperature -55°C ~ 250°C
Package / Case Radial
Supplier Device Package -
Size / Dimension 0.512" L x 0.354" W (13.00mm x 9.00mm)
Height - Seated (Max) 1.024" (26.00mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
VM5JB2R20 RES CERM WW 5W 2.2 OHM 5% VERT 47,660 $0.1050 100%
VM5JB2R00 RES CERM WW 5W 2 OHM 5% VERT 47,658 $0.1050 94%
SQMW51R8J RES 1.80 OHM 5W 5% RADIAL 8,232 $0.6100 88%
VM5JB2R70 RES 2.7 OHM 5W 5% RADIAL 47,656 $0.1050 88%
SQMW53R3J RES 3.30 OHM 5W 5% RADIAL 8,236 $0.6100 76%
VM3JB2R00 RES CERM WW 3W 2 OHM 5% VERT 36,072 $0.1388 70%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

TE Connectivity AMP Connectors Parts in Stock

Request a Quote

Need SQMW52R2J or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.