SP122DHTS MITEQ, Inc.(L3 Narda-MITEQ) component image

SP122DHTS

In Stock

MITEQ, Inc.(L3 Narda-MITEQ) logo MITEQ, Inc.(L3 Narda-MITEQ) · franchised distributor

PIN SWITCH SP2T .5-18 GHZ

Listed in RF Switches

44 pcs in stock ships same day before 6pm

from $2,955.0000

Quantity Unit Price
1+ $2,955.0000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the SP122DHTS?

SP122DHTS is a pin switch sp2t .5-18 ghz, featuring an insertion loss of 3.1dB (max), the Module, SMA Connectors case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

MITEQ, Inc.(L3 Narda-MITEQ) Series Variants in Stock

8 variants of this series in stock
Part Number Description Stock Unit Price Status
SP213DHTS-80 PIN SWITCH SPST 2-18 GHZ 46 $2,461.5000 In Stock
SP213DHS-80 PIN SWITCH SPST 2-18 GHZ 45 $2,379.0000 In Stock
SP213DHTS PIN SWITCH SPST 2-18 GHZ 38 $2,145.0000 In Stock
SP143DHS PIN SWITCH SP4T 2-18 GHZ 49 $4,068.0000 In Stock
SP123DHTS PIN SWITCH SP2T 2-18 GHZ 41 $2,613.0000 In Stock
SP142DHTS PIN SWITCH SP4T .5-18 GHZ 45 $3,975.0000 In Stock
SP162DHTS PIN SWITCH SP6T .5-18 GHZ 46 $5,146.5000 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

SP122DHTS Specifications

Series -
Package Box
Part Status Active
RF Type General Purpose
Topology Absorptive
Circuit SPDT
Frequency Range 500MHz ~ 18GHz
Isolation 55dB (min)
Insertion Loss 3.1dB (max)
Test Frequency 12GHz ~ 18GHz
P1dB -
IIP3 -
Features -
Impedance -
Voltage - Supply -
Operating Temperature -54°C ~ 95°C
Package / Case Module, SMA Connectors
Supplier Device Package Module

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
SW3-010180RN1NM SWITCH 3,097 RFQ 75%
SW3-010180RN1NF SWITCH 4,038 RFQ 75%
S328BN SWITCH 4,760 RFQ 75%
S328BDF1 SWITCH 4,627 RFQ 75%
SW3-010180RN1HM SWITCH 3,583 RFQ 75%
S328BD SWITCH 2,042 RFQ 75%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

MITEQ, Inc.(L3 Narda-MITEQ) Parts in Stock

Request a Quote

Need SP122DHTS or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.