SN74LS373NSR Texas Instruments component image

SN74LS373NSR

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OCT TRANSP D-TYP LATCH 20SO

Listed in Logic - Latches

5,099 pcs in stock ships same day before 6pm

from $0.3224

Quantity Unit Price
1 - 1,999 $0.9900
2,000 - 5,999 $0.3596
6,000 - 9,999 $0.3348
10,000+ $0.3224 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the SN74LS373NSR?

SN74LS373NSR is a ic oct transp d-typ latch 20so, featuring the 20-SOIC (0.209", 5.30mm Width) package, Surface Mount mounting, a supply range of 4.75V ~ 5.25V. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Texas Instruments Series Variants in Stock

24 variants of this series in stock
Part Number Description Stock Unit Price Status
SN74S374NSRE4 IC FF D-TYPE SNGL 8BIT 20SO 1,569 RFQ In Stock
SN74LS374N IC FF D-TYPE SNGL 8BIT 20DIP 5,368 $0.9400 In Stock
SN74S374NSRG4 IC FF D-TYPE SNGL 8BIT 20SO 3,370 RFQ In Stock
SN74LS374DWRG4 IC FF D-TYPE SNGL 8BIT 20SOIC 12,121 $0.4142 In Stock
SN74LS374DW IC FF D-TYPE SNGL 8BIT 20SOIC 5,297 $0.9500 In Stock
SN74S374DWR IC FF D-TYPE SNGL 8BIT 20SOIC 3,169 RFQ In Stock
SN74S374DWE4 IC FF D-TYPE SNGL 8BIT 20SOIC 1,806 RFQ In Stock
SN74LS374NSR IC FF D-TYPE SNGL 8BIT 20SO 5,080 $0.9900 In Stock
SN74LS374NG4 IC FF D-TYPE SNGL 8BIT 20DIP 2,784 RFQ In Stock
SN74LS374DWR IC FF D-TYPE SNGL 8BIT 20SOIC 5,096 $0.9900 In Stock
+ 14 more variants in stock — browse the full category

Technical Parameters

SN74LS373NSR Specifications

Series 74LS
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Logic Type D-Type Transparent Latch
Circuit 8:8
Output Type Tri-State
Voltage - Supply 4.75V ~ 5.25V
Independent Circuits 1
Delay Time - Propagation 12ns
Current - Output High, Low 2.6mA, 24mA
Operating Temperature 0°C ~ 70°C
Mounting Type Surface Mount
Package / Case 20-SOIC (0.209", 5.30mm Width)
Supplier Device Package 20-SO

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
SN74HC373ANSR LOGIC GATES AND INVERTERS 8,670 $0.5800 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need SN74LS373NSR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.