SN74LS112ANSR Texas Instruments component image

SN74LS112ANSR

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC FF JK TYPE DUAL 1BIT 16SO

Listed in Logic - Flip Flops

15,460 pcs in stock ships same day before 6pm

from $0.2743

Quantity Unit Price
1 - 1,999 $0.3243
2,000 - 5,999 $0.3060
6,000 - 9,999 $0.2849
10,000+ $0.2743 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the SN74LS112ANSR?

SN74LS112ANSR is a ic ff jk type dual 1bit 16so, featuring the 16-SOIC (0.209", 5.30mm Width) package, Surface Mount mounting, a supply range of 4.75V ~ 5.25V. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

9 variants of this series in stock
Part Number Description Stock Unit Price Status
SN74LS112AN IC FF JK TYPE DUAL 1BIT 16DIP 5,995 $0.8400 In Stock
SN74S112ADRE4 IC FF JK TYPE DUAL 1BIT 16SOIC 3,906 RFQ In Stock
SN74LS112ADRE4 IC FF JK TYPE DUAL 1BIT 16SOIC 15,623 $0.3206 In Stock
SN74S112ANSRG4 IC FF JK TYPE DUAL 1BIT 16SO 688 RFQ In Stock
SN74S112AN IC FF JK TYPE DUAL 1BIT 16DIP 2,252 $2.2700 In Stock
SN74LS112AD IC FF JK TYPE DUAL 1BIT 16SOIC 5,469 $0.9200 In Stock
SN74S112ANSRE4 IC FF JK TYPE DUAL 1BIT 16SO 976 RFQ In Stock
SN74S112ADRG4 IC FF JK TYPE DUAL 1BIT 16SOIC 2,775 RFQ In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

SN74LS112ANSR Specifications

Series 74LS
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Function Set(Preset) and Reset
Type JK Type
Output Type Complimentary
Number of Elements 2
Number of Bits per Element 1
Clock Frequency 45 MHz
Max Propagation Delay @ V, Max CL 20ns @ 5V, 15pF
Trigger Type Negative Edge
Current - Output High, Low 400µA, 8mA
Voltage - Supply 4.75V ~ 5.25V
Current - Quiescent (Iq) 6 mA
Input Capacitance -
Operating Temperature 0°C ~ 70°C (TA)
Mounting Type Surface Mount
Supplier Device Package 16-SO
Package / Case 16-SOIC (0.209", 5.30mm Width)

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need SN74LS112ANSR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.