SN74HCT74NG4 Texas Instruments component image

SN74HCT74NG4

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC FF D-TYPE DUAL 1BIT 14DIP

Listed in Logic - Flip Flops

35,339 pcs in stock ships same day before 6pm

from $0.1337

Quantity Unit Price
1 - 3,099 $0.1417
3,100+ $0.1337 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the SN74HCT74NG4?

SN74HCT74NG4 is a ic ff d-type dual 1bit 14dip, featuring the 14-DIP (0.300", 7.62mm) package, Through Hole mounting, a supply range of 4.5V ~ 5.5V. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Texas Instruments Series Variants in Stock

11 variants of this series in stock
Part Number Description Stock Unit Price Status
SN74HCT74DBR IC FF D-TYPE DUAL 1BIT 14SSOP 11,659 $0.4300 In Stock
SN74HCT74PW IC FF D-TYPE DUAL 1BIT 14TSSOP 11,407 $0.4400 In Stock
SN74HCT74DT IC FF D-TYPE DUAL 1BIT 14SOIC 5,853 $0.8600 In Stock
SN74HCT74DR IC FF D-TYPE DUAL 1BIT 14SOIC 10,041 $0.5000 In Stock
SN74HCT74PWR IC FF D-TYPE DUAL 1BIT 14TSSOP 13,560 $0.3700 In Stock
SN74HCT74NSR IC FF D-TYPE DUAL 1BIT 14SOP 29,864 $0.1676 In Stock
SN74HCT74N IC FF D-TYPE DUAL 1BIT 14DIP 10,039 $0.5000 In Stock
SN74HCT74DRG4 IC FF D-TYPE DUAL 1BIT 14SOIC 4,407 RFQ In Stock
SN74HCT74DRE4 IC FF D-TYPE DUAL 1BIT 14SOIC 47,870 $0.1045 In Stock
SN74HCT74D IC FF D-TYPE DUAL 1BIT 14SOIC 10,238 $0.4900 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

SN74HCT74NG4 Specifications

Series 74HCT
Package Tube
Part Status Active
Function Set(Preset) and Reset
Type D-Type
Output Type Complimentary
Number of Elements 2
Number of Bits per Element 1
Clock Frequency 46 MHz
Max Propagation Delay @ V, Max CL 25ns @ 5.5V, 50pF
Trigger Type Positive Edge
Current - Output High, Low 4mA, 4mA
Voltage - Supply 4.5V ~ 5.5V
Current - Quiescent (Iq) 4 µA
Input Capacitance 3 pF
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Through Hole
Supplier Device Package 14-PDIP
Package / Case 14-DIP (0.300", 7.62mm)

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
SN74HCT74NE4 SN74HCT74 DUAL D-TYPE POSITIVE-E 41,698 $0.1200 100%
SN74HCT74N IC FF D-TYPE DUAL 1BIT 14DIP 10,039 $0.5000 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need SN74HCT74NG4 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.