SN74HC163N Texas Instruments component image

SN74HC163N

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC 4-BIT BINARY COUNTER 16-DIP

Listed in Logic - Counters, Dividers

7,277 pcs in stock ships same day before 6pm

from $0.2278

Quantity Unit Price
1 - 9 $0.6900
10 - 24 $0.5892
25 - 99 $0.5499
100 - 499 $0.4399
500 - 999 $0.3456
1,000 - 2,499 $0.2671
2,500 - 4,999 $0.2435
5,000+ $0.2278 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the SN74HC163N?

SN74HC163N is a ic 4-bit binary counter 16-dip, featuring the 16-DIP (0.300", 7.62mm) package, Through Hole mounting, a supply range of 2 V ~ 6.0 V. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
SN74HC163D IC 4-BIT BINARY COUNTER 16-SOIC 11,152 $0.4500 In Stock
SN74HC163DR IC COUNTER 4BIT SYNC BIN 16-SOIC 11,161 $0.4500 In Stock
SN74HC163PW IC COUNTER 4BIT SYNC BIN 16TSSOP 11,952 $0.4200 In Stock
SN74HC163PWT IC COUNTER 4BIT SYNC BIN 16TSSOP 5,525 $0.9100 In Stock
SN74HC163DT IC COUNTER 4BIT SYNC BIN 16-SOIC 5,474 $0.9200 In Stock
SN74HC163NG4 IC COUNTER 4BIT SYNC BIN 16-DIP 18,785 $0.2667 In Stock
SN74HC163DBRG4 IC COUNTER BINARY 4BIT 16SSOP 3,266 RFQ In Stock
SN74HC163PWR IC COUNTER 4BIT SYNC BIN 16TSSOP 9,650 $0.5200 In Stock
SN74HC163DRE4 IC COUNTER 4BIT SYNC BIN 16-SOIC 40,491 $0.1236 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

SN74HC163N Specifications

Series 74HC
Package Tube
Part Status Active
Logic Type Binary Counter
Direction Up
Number of Elements 1
Number of Bits per Element 4
Reset Synchronous
Timing Synchronous
Count Rate 36 MHz
Trigger Type Positive Edge
Voltage - Supply 2 V ~ 6.0 V
Operating Temperature -40°C ~ 85°C
Mounting Type Through Hole
Package / Case 16-DIP (0.300", 7.62mm)
Supplier Device Package 16-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CD74HC161E-NG IC SYNC BINARY COUNT 4BIT 16DIP 6,299 $0.8000 100%
SN74HC4020N IC ASYNC BINARY COUNTER 16-DIP 8,246 $0.6100 100%
SN74HC191NG4 IC COUNTER 4BIT SYNC BIN 16-DIP 18,916 $0.2649 100%
M74HC4040B1R IC COUNTER 12STAGE BINARY 16-DIP 2,286 RFQ 100%
M74HC161B1R IC COUNTER 4BIT SYNC 16-DIP 3,308 RFQ 100%
74HC40103N,652 IC COUNTER 8BIT SYNC BIN 16DIP 4,486 RFQ 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need SN74HC163N or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.