SN74CBTD3861DBR Texas Instruments component image

SN74CBTD3861DBR

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC BUS SWITCH 10 X 1:1 24SSOP

Listed in Logic - Signal Switches, Multiplexers, Decoders

6,994 pcs in stock ships same day before 6pm

from $0.7200

Quantity Unit Price
1 - 1,999 $0.7200 BEST
2,000+ $0.7200 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the SN74CBTD3861DBR?

SN74CBTD3861DBR is a ic bus switch 10 x 1:1 24ssop, featuring the 24-SSOP (0.209", 5.30mm Width) package, Surface Mount mounting, a supply range of 4.5V ~ 5.5V. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

11 variants of this series in stock
Part Number Description Stock Unit Price Status
SN74CBTD3861DWG4 IC BUS SWITCH 10 X 1:1 24SOIC 13,749 $0.3646 In Stock
SN74CBTD3861PWR IC BUS SWITCH 10 X 1:1 24TSSOP 7,853 $0.6400 In Stock
SN74CBTD3861PWG4 IC BUS SWITCH 10 X 1:1 24TSSOP 14,846 $0.3375 In Stock
SN74CBTD3861DWR IC BUS SWITCH 10 X 1:1 24SOIC 6,697 $0.7500 In Stock
SN74CBTD3861DGVR IC BUS SWITCH 10 X 1:1 24TVSOP 7,623 $0.6600 In Stock
SN74CBTD3861PW IC BUS SWITCH 10 X 1:1 24TSSOP 6,360 $0.7900 In Stock
SN74CBTD3861DBQR IC BUS SW 10 X 1:1 24SSOP/QSOP 8,381 $0.6000 In Stock
SN74CBTD3861PWE4 IC BUS SWITCH 10 X 1:1 24TSSOP 14,856 $0.3375 In Stock
SN74CBTD3861PWRE4 IC BUS SWITCH 10 X 1:1 24TSSOP 18,749 $0.2672 In Stock
74CBTD3861DBQRG4 IC BUS SW 10 X 1:1 24SSOP/QSOP 19,995 $0.2505 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

SN74CBTD3861DBR Specifications

Series 74CBTD
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Type Bus Switch
Circuit 10 x 1:1
Independent Circuits 1
Current - Output High, Low -
Voltage Supply Source Single Supply
Voltage - Supply 4.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 24-SSOP (0.209", 5.30mm Width)
Supplier Device Package 24-SSOP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
SN74CBTS6800DBRG4 IC BUS SWITCH 10 X 1:1 24SSOP 3,087 RFQ 100%
SN74CBTS6800DBRE4 IC BUS SWITCH 10 X 1:1 24SSOP 4,884 RFQ 100%
SN74CBTS6800DBR IC BUS SWITCH 10 X 1:1 24SSOP 4,064 $1.2400 100%
SN74CBT6800ADBRE4 IC BUS SWITCH 10 X 1:1 24SSOP 2,182 RFQ 95%
SN74CBT6800CDBRE4 IC BUS SWITCH 10 X 1:1 24SSOP 2,874 RFQ 95%
SN74CBT6800CDBRG4 IC BUS SWITCH 10 X 1:1 24SSOP 3,571 RFQ 95%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need SN74CBTD3861DBR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.