SN65HVD485EP Texas Instruments component image

SN65HVD485EP

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC TRANSCEIVER HALF 1/1 8DIP

Listed in Interface - Drivers, Receivers, Transceivers

1,788 pcs in stock ships same day before 6pm

from $1.2626

Quantity Unit Price
1 - 9 $2.8600
10 - 49 $2.5740
50 - 99 $2.4281
100 - 499 $2.0688
500 - 999 $1.6997
1,000 - 2,499 $1.4083
2,500 - 4,999 $1.3112
5,000+ $1.2626 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the SN65HVD485EP?

SN65HVD485EP is a ic transceiver half 1/1 8dip, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting, a supply range of 4.5V ~ 5.5V. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

9 variants of this series in stock
Part Number Description Stock Unit Price Status
SN65HVD485EDG4 IC TRANSCEIVER HALF 1/1 8SOIC 2,830 $1.7956 In Stock
SN65HVD485EDRG4 IC TRANSCEIVER HALF 1/1 8SOIC 2,404 $2.1200 In Stock
SN65HVD485EDGKG4 IC TRANSCEIVER HALF 1/1 8VSSOP 2,548 $1.9924 In Stock
SN65HVD485EPG4 IC TRANSCEIVER HALF 1/1 8DIP 2,610 $1.9398 In Stock
SN65HVD485EDGK IC TRANSCEIVER HALF 1/1 8VSSOP 1,787 $2.8500 In Stock
SN65HVD485EDGKR IC TRANSCEIVER HALF 1/1 8VSSOP 1,849 $2.7500 In Stock
SN65HVD485ED IC TRANSCEIVER HALF 1/1 8SOIC 1,921 $2.6500 In Stock
SN65HVD485EDR IC TRANSCEIVER HALF 1/1 8SOIC 2,392 $2.1200 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

SN65HVD485EP Specifications

Series -
Package Tube
Part Status Active
Type Transceiver
Protocol RS422, RS485
Number of Drivers/Receivers 1/1
Duplex Half
Receiver Hysteresis 30 mV
Data Rate 10Mbps
Voltage - Supply 4.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
SN65HVD1787P IC TRANSCEIVER HALF 1/1 8DIP 1,620 $3.1700 100%
SN65HVD06P IC TRANSCEIVER HALF 1/1 8DIP 958 $5.4800 100%
ISL8485EIPZ IC TRANSCEIVER HALF 1/1 8DIP 1,732 $2.9700 100%
SN75HVD06P IC TRANSCEIVER HALF 1/1 8DIP 1,816 $2.8000 100%
SN65HVD485EPG4 IC TRANSCEIVER HALF 1/1 8DIP 2,610 $1.9398 100%
MAX3443ECPA FAIL-SAFE RS-485/J1708 TRANSCVR 1,487 $3.4700 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need SN65HVD485EP or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.