SIL08M151J TE Connectivity AMP Connectors component image

SIL08M151J

In Stock

TE Connectivity AMP Connectors logo TE Connectivity AMP Connectors · franchised distributor

RES ARRAY 4 RES 150 OHM 8SIP

Listed in Resistor Networks, Arrays

2,072 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the SIL08M151J?

SIL08M151J is a res array 4 res 150 ohm 8sip, featuring a resistance of 150, a tolerance of ±5%, the 8-SIP case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

TE Connectivity AMP Connectors Series Variants in Stock

34 variants of this series in stock
Part Number Description Stock Unit Price Status
SIL09E223J RES ARRAY 8 RES 22K OHM 9SIP 705 RFQ In Stock
SIL10M183G RES ARRAY 5 RES 18K OHM 10SIP 21,242 $0.2359 In Stock
SIL09E822J RES ARRAY 8 RES 8.2K OHM 9SIP 1,784 RFQ In Stock
SIL08M273J RES ARRAY 4 RES 27K OHM 8SIP 4,261 RFQ In Stock
SIL08M471J RES ARRAY 4 RES 470 OHM 8SIP 1,137 RFQ In Stock
SIL05E562J RES ARRAY 4 RES 5.6K OHM 5SIP 3,415 RFQ In Stock
SIL08M750J RES ARRAY 4 RES 75 OHM 8SIP 1,484 RFQ In Stock
SIL12M222J RES ARRAY 6 RES 2.2K OHM 12SIP 1,400 RFQ In Stock
SIL08M152J RES ARRAY 4 RES 1.5K OHM 8SIP 676 RFQ In Stock
SIL07E102G RES ARRAY 6 RES 1K OHM 7SIP 2,147 RFQ In Stock
+ 24 more variants in stock — browse the full category

Technical Parameters

SIL08M151J Specifications

Series SIL, Citec
Package Bulk
Part Status Active
Circuit Type Isolated
Resistance (Ohms) 150
Tolerance ±5%
Number of Resistors 4
Resistor Matching Ratio -
Resistor-Ratio-Drift -
Number of Pins 8
Power Per Element 200mW
Temperature Coefficient ±200ppm/°C
Operating Temperature -55°C ~ 125°C
Applications -
Mounting Type Through Hole
Package / Case 8-SIP
Supplier Device Package -
Size / Dimension 0.800" L x 0.098" W (20.32mm x 2.50mm)
Height - Seated (Max) 0.200" (5.08mm)

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
SIL08M101J RES ARRAY 4 RES 100 OHM 8SIP 2,113 RFQ 76%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

TE Connectivity AMP Connectors Parts in Stock

Request a Quote

Need SIL08M151J or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.