SBCH151K5J TE Connectivity AMP Connectors component image

SBCH151K5J

In Stock

TE Connectivity AMP Connectors logo TE Connectivity AMP Connectors · franchised distributor

RES 1.50K OHM 17W 5% AXIAL

Listed in Through Hole Resistors

2,389 pcs in stock ships same day before 6pm

from $0.8665

Quantity Unit Price
1 - 9 $2.1300
10 - 24 $1.8908
25 - 49 $1.7535
50 - 99 $1.6505
100 - 249 $1.4442
250 - 499 $1.2378
500 - 999 $1.0316
1,000 - 4,999 $0.8940
5,000+ $0.8665 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the SBCH151K5J?

SBCH151K5J is a res 1.50k ohm 17w 5% axial, featuring a power rating of 17W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

TE Connectivity AMP Connectors Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
6111-EP-252E MOUNTING HARDWARE FOR 280W 273 $22.3800 In Stock
SBCHE61K0J RES 1.00K OHM 7W 5% AXIAL 5,660 $0.8900 In Stock
SBCHE612RJ RES 12.0 OHM 7W 5% AXIAL 5,647 $0.8900 In Stock
SBCHE468RJ RES 68.0 OHM 4W 5% AXIAL 5,986 $0.8400 In Stock
SBC43K3J RES 3.30K OHM 5W 5% AXIAL 3,883 $1.3000 In Stock
SBCV63R9K RES 3.90 OHM 7W 10% RADIAL 3,031 $1.6700 In Stock
SBCHE63R3K RES 3.30 OHM 7W 10% AXIAL 4,948 $1.0200 In Stock
SBCH4470RJ RES 470 OHM 4W 5% AXIAL 4,418 $1.1400 In Stock
SBCHE433RJ RES 33.0 OHM 4W 5% AXIAL 5,987 $0.8400 In Stock
SBCHE510KJ RES 10.0K OHM 5W 5% AXIAL 5,313 $0.9500 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

SBCH151K5J Specifications

Series SBC, CGS
Package Bulk
Part Status Active
Resistance 1.5 kOhms
Tolerance ±5%
Power (Watts) 17W
Composition Wirewound
Features Flame Proof, Safety
Temperature Coefficient ±200ppm/°C
Operating Temperature -55°C ~ 350°C
Package / Case Axial
Supplier Device Package -
Size / Dimension 0.394" x 0.354" Rectangular x 2.953" L (10.00mm x 9.00mm x 75.00mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
C71K5JT RES 1.50K OHM 7W 5% AXIAL 7,389 $0.6794 67%
C3A1K6JT RES 1.60K OHM 3W 5% AXIAL 13,053 $0.3845 63%
C3A1K3JT RES 1.30K OHM 3W 5% AXIAL 13,044 $0.3845 58%
SBC81K2J RES 1.2K OHM 9W 5% AXIAL 3,205 $1.5800 56%
C71K8JT RES 1.80K OHM 7W 5% AXIAL 7,397 $0.6794 56%
SBCH61K8J RES 1.8K OHM 7W 5% AXIAL 3,544 $1.4300 56%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

TE Connectivity AMP Connectors Parts in Stock

Request a Quote

Need SBCH151K5J or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.