SBCH111R5J TE Connectivity AMP Connectors component image

SBCH111R5J

In Stock

TE Connectivity AMP Connectors logo TE Connectivity AMP Connectors · franchised distributor

RES 1.5 OHM 11W 5% AXIAL

Listed in Through Hole Resistors

2,902 pcs in stock ships same day before 6pm

from $0.7095

Quantity Unit Price
1 - 9 $1.7500
10 - 24 $1.5488
25 - 49 $1.4361
50 - 99 $1.3516
100 - 249 $1.1826
250 - 499 $1.0136
500 - 999 $0.8447
1,000 - 4,999 $0.7321
5,000+ $0.7095 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the SBCH111R5J?

SBCH111R5J is a res 1.5 ohm 11w 5% axial, featuring a power rating of 11W, a tolerance of ±5%, a Wirewound composition, and the Axial case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

TE Connectivity AMP Connectors Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
6111-EP-252E MOUNTING HARDWARE FOR 280W 273 $22.3800 In Stock
SBCHE61K0J RES 1.00K OHM 7W 5% AXIAL 5,660 $0.8900 In Stock
SBCHE612RJ RES 12.0 OHM 7W 5% AXIAL 5,647 $0.8900 In Stock
SBCHE468RJ RES 68.0 OHM 4W 5% AXIAL 5,986 $0.8400 In Stock
SBC43K3J RES 3.30K OHM 5W 5% AXIAL 3,883 $1.3000 In Stock
SBCV63R9K RES 3.90 OHM 7W 10% RADIAL 3,031 $1.6700 In Stock
SBCHE63R3K RES 3.30 OHM 7W 10% AXIAL 4,948 $1.0200 In Stock
SBCH4470RJ RES 470 OHM 4W 5% AXIAL 4,418 $1.1400 In Stock
SBCHE433RJ RES 33.0 OHM 4W 5% AXIAL 5,987 $0.8400 In Stock
SBCHE510KJ RES 10.0K OHM 5W 5% AXIAL 5,313 $0.9500 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

SBCH111R5J Specifications

Series SBC, CGS
Package Bulk
Part Status Active
Resistance 1.5 Ohms
Tolerance ±5%
Power (Watts) 11W
Composition Wirewound
Features Flame Proof, Safety
Temperature Coefficient ±400ppm/°C
Operating Temperature -55°C ~ 350°C
Package / Case Axial
Supplier Device Package -
Size / Dimension 0.354" Square x 1.496" L (9.00mm x 38.00mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CP00101R500KE663 RES 1.5 OHM 10W 10% AXIAL 15,727 $0.3186 80%
CP00071R500JE663 RES 1.5 OHM 7W 5% AXIAL 19,141 $0.2619 78%
CP00071R500KE663 RES 1.5 OHM 7W 10% AXIAL 19,141 $0.2619 62%
CP00051R500KE663 RES 1.5 OHM 5W 10% AXIAL 22,353 $0.2241 51%
CP00101R500JE66 RES 1.5 OHM 10W 5% AXIAL 1,429 RFQ 95%
CP00071R500JE66 RES 1.5 OHM 7W 5% AXIAL 953 RFQ 78%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

TE Connectivity AMP Connectors Parts in Stock

Request a Quote

Need SBCH111R5J or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.