S4-1RF1 Riedon component image

S4-1RF1

In Stock

Riedon logo Riedon · franchised distributor

RES SMD 1 OHM 1% 2W 4525

Listed in Chip Resistor - Surface Mount

4,545 pcs in stock ships same day before 6pm

from $0.3836

Quantity Unit Price
1 - 249 $1.1100
250 - 499 $0.6023
500 - 749 $0.5072
750 - 1,249 $0.4597
1,250 - 2,499 $0.4216
2,500 - 6,249 $0.4121
6,250 - 12,499 $0.4042
12,500 - 24,999 $0.3947
25,000+ $0.3836 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the S4-1RF1?

S4-1RF1 is a res smd 1 ohm 1% 2w 4525, featuring a power rating of 2W, a tolerance of ±1%, a Wirewound composition, and the 4525 J-Lead case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Riedon Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
S2-0R075F1 RES 0.075 OHM 1% 1W 2615 7,558 $0.6656 In Stock
S4-470RJ1 RES SMD 470 OHM 5% 2W 4525 8,606 $0.5833 In Stock
S3-100RJ8 RES SMD 100 OHM 5% 3W 6327 7,755 $0.6480 In Stock
S3-47RF1 RES SMD 47 OHM 1% 3W 6327 3,459 $1.4600 In Stock
S3-0R05F1 RES 0.05 OHM 1% 3W 6327 2,990 $1.6900 In Stock
S1-0R015J8 RES 0.015 OHM 5% 1/2W 1913 4,885 $1.0335 In Stock
S5-47K5F8 RES SMD 47.5K OHM 1% 4W 8230 3,893 $1.2960 In Stock
S2-0R047J1 RES 0.047 OHM 5% 1W 2615 5,577 $0.9030 In Stock
S3-0R024J8 RES 0.024 OHM 5% 3W 6327 3,508 $1.4430 In Stock
S4-0R075J1 RES 0.075 OHM 5% 2W 4525 5,765 $0.8721 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

S4-1RF1 Specifications

Series S
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Resistance 1 Ohms
Tolerance ±1%
Power (Watts) 2W
Composition Wirewound
Features Current Sense, Flame Proof, Moisture Resistant, Pulse Withstanding, Safety
Temperature Coefficient ±50ppm/°C
Operating Temperature -55°C ~ 275°C
Package / Case 4525 J-Lead
Supplier Device Package -
Ratings -
Size / Dimension 0.449" L x 0.252" W (11.40mm x 6.40mm)
Height - Seated (Max) 0.197" (5.00mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
PWR4525W1R03F RES SMD 1.03 OHM 1% 2W 4525 4,594 RFQ 98%
PWR4525NR820FE RES 820M OHM 1% 2W 4525 2,653 $1.9200 88%
PWR4525WR750FE RES 0.75 OHM 1% 2W 4525 7,272 $0.6916 83%
S4-0R75F1 RES 0.75 OHM 1% 2W 4525 5,644 $0.8930 83%
PWR4525W1R50F RES SMD 1.5 OHM 1% 2W 4525 6,555 $0.7680 76%
PWR4525W1R00JE RES SMD 1 OHM 5% 2W 4525 8,222 $0.6118 75%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Riedon Parts in Stock

Request a Quote

Need S4-1RF1 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.