RW2S0DA100RJ Ohmite component image

RW2S0DA100RJ

In Stock

Ohmite logo Ohmite · franchised distributor

RES SMD 100 OHM 5% 2W J LEAD

Listed in Chip Resistor - Surface Mount

1,330 pcs in stock ships same day before 6pm

from $3.8800

Quantity Unit Price
1 - 99 $3.8800 BEST
100+ $3.8800 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the RW2S0DA100RJ?

RW2S0DA100RJ is a res smd 100 ohm 5% 2w j lead, featuring a power rating of 2W, a tolerance of ±5%, a Wirewound composition, and the 4524 J-Lead case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Ohmite Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
RC0R5DB100RJE RES SMD 100 OHM 5% 1/2W J LEAD 1,107 $4.6400 In Stock
RW1S5CAR080JE RES 0.08 OHM 5% 1.5W J LEAD 1,819 $2.8175 In Stock
RC0R5DB56R0JET RES SMD 56 OHM 5% 1/2W J LEAD 3,075 $1.6492 In Stock
RC1R0EA4R70KET RES SMD 4.7 OHM 10% 1W J LEAD 3,376 $1.4985 In Stock
RW3R0DBR100JT RES 0.1 OHM 5% 3W J LEAD 3,041 RFQ In Stock
RW3R0DB24R0JE RES SMD 24 OHM 5% 3W J LEAD 1,163 $4.4700 In Stock
RW2R0DAR005JE RES 0.005 OHM 5% 2W J LEAD 2,179 $2.3310 In Stock
RW2S0DA47R0JET RES SMD 47 OHM 5% 2W J LEAD 2,982 $1.7024 In Stock
RW1S0BAR024JET RES 0.024 OHM 5% 1W J LEAD 3,461 $1.4630 In Stock
RW1S0BAR027J RES 0.027 OHM 5% 1W J LEAD 3,103 RFQ In Stock
More variants of this series in stock — browse the full category

Technical Parameters

RW2S0DA100RJ Specifications

Series RW
Package Bulk
Part Status Active
Resistance 100 Ohms
Tolerance ±5%
Power (Watts) 2W
Composition Wirewound
Features Current Sense
Temperature Coefficient ±20ppm/°C
Operating Temperature -55°C ~ 150°C
Package / Case 4524 J-Lead
Supplier Device Package SMD J-Lead, Pedestal
Ratings -
Size / Dimension 0.455" L x 0.240" W (11.56mm x 6.10mm)
Height - Seated (Max) 0.231" (5.87mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
RW2S0DA100RJE RES SMD 100 OHM 5% 2W J LEAD 1,836 $2.7825 100%
RW2S0DA100RJT RES SMD 100 OHM 5% 2W J LEAD 1,583 $3.2186 100%
RW2S0DA100RJET RES SMD 100 OHM 5% 2W J LEAD 2,987 $1.7024 100%
RW2S0DA68R0JE RES SMD 68 OHM 5% 2W J LEAD 1,831 $2.7825 77%
RW2S0DA68R0JET RES SMD 68 OHM 5% 2W J LEAD 2,968 $1.7024 77%
RW2S0DA68R0J RES SMD 68 OHM 5% 2W J LEAD 1,481 RFQ 77%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need RW2S0DA100RJ or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.