RW2R0DAR050FE Ohmite component image

RW2R0DAR050FE

In Stock

Ohmite logo Ohmite · franchised distributor

RES 0.05 OHM 1% 2W J LEAD

Listed in Chip Resistor - Surface Mount

1,285 pcs in stock ships same day before 6pm

from $1.7718

Quantity Unit Price
1 - 9 $4.0300
10 - 24 $3.6013
25 - 49 $3.3852
50 - 99 $3.0971
100 - 249 $2.6649
250 - 499 $2.3048
500 - 999 $2.0887
1,000 - 4,999 $1.8367
5,000+ $1.7718 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the RW2R0DAR050FE?

RW2R0DAR050FE is a res 0.05 ohm 1% 2w j lead, featuring a power rating of 2W, a tolerance of ±1%, a Wirewound composition, and the 4524 J-Lead case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Ohmite Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
RC0R5DB100RJE RES SMD 100 OHM 5% 1/2W J LEAD 1,107 $4.6400 In Stock
RW1S5CAR080JE RES 0.08 OHM 5% 1.5W J LEAD 1,819 $2.8175 In Stock
RC0R5DB56R0JET RES SMD 56 OHM 5% 1/2W J LEAD 3,075 $1.6492 In Stock
RC1R0EA4R70KET RES SMD 4.7 OHM 10% 1W J LEAD 3,376 $1.4985 In Stock
RW3R0DBR100JT RES 0.1 OHM 5% 3W J LEAD 3,041 RFQ In Stock
RW3R0DB24R0JE RES SMD 24 OHM 5% 3W J LEAD 1,163 $4.4700 In Stock
RW2R0DAR005JE RES 0.005 OHM 5% 2W J LEAD 2,179 $2.3310 In Stock
RW2S0DA47R0JET RES SMD 47 OHM 5% 2W J LEAD 2,982 $1.7024 In Stock
RW1S0BAR024JET RES 0.024 OHM 5% 1W J LEAD 3,461 $1.4630 In Stock
RW1S0BAR027J RES 0.027 OHM 5% 1W J LEAD 3,103 RFQ In Stock
More variants of this series in stock — browse the full category

Technical Parameters

RW2R0DAR050FE Specifications

Series RW
Package Bulk
Part Status Active
Resistance 50 mOhms
Tolerance ±1%
Power (Watts) 2W
Composition Wirewound
Features Current Sense
Temperature Coefficient -
Operating Temperature -55°C ~ 150°C
Package / Case 4524 J-Lead
Supplier Device Package SMD J-Lead, Recessed
Ratings -
Size / Dimension 0.455" L x 0.240" W (11.56mm x 6.10mm)
Height - Seated (Max) 0.231" (5.87mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
RW2R0DAR050FT RES 0.05 OHM 1% 2W J LEAD 1,688 $3.0324 100%
RW2R0DAR050F RES 0.05 OHM 1% 2W J LEAD 4,753 RFQ 100%
RW2R0DAR050FET RES 0.05 OHM 1% 2W J LEAD 3,341 $1.5162 100%
RW2S0DAR050JT RES 0.05 OHM 5% 2W J LEAD 1,097 RFQ 75%
RW2R0DAR050JE RES 0.05 OHM 5% 2W J LEAD 2,180 $2.3310 75%
RW2S0DAR050JET RES 0.05 OHM 5% 2W J LEAD 3,764 $1.3433 75%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need RW2R0DAR050FE or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.