RNC55H8001FSB14 Vishay / Dale component image

RNC55H8001FSB14

In Stock

Vishay / Dale logo Vishay / Dale · franchised distributor

ERC-55 8K 1% T-2 RNC55H8001FS B1

Listed in Through Hole Resistors

5,390 pcs in stock ships same day before 6pm

from $0.9363

Quantity Unit Price
1+ $0.9363 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the RNC55H8001FSB14?

RNC55H8001FSB14 is a erc-55 8k 1% t-2 rnc55h8001fs b1, featuring a power rating of 0.125W, 1/8W, a tolerance of ±1%, a Metal Film composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Part Number Logic · Vishay Dale

Reading RNC55H8001FSB14

RNC Series— MIL-PRN-39009/06018 qualified precision thin-film resistor (Vishay Dale)
55 Case code— 55=0.250W axial
H Tolerance— H=±0.1%
— Value code— 4-digit EIA with R decimal
— Packaging— See suffix

Full ordering code structure for every value in this series is covered in the datasheet's Ordering Information section.

Technical Parameters

RNC55H8001FSB14 Specifications

Series Military, MIL-PRF-55182/01, RNC55
Package Bulk
Part Status Active
Resistance 8 kOhms
Tolerance ±1%
Power (Watts) 0.125W, 1/8W
Composition Metal Film
Features Military, Moisture Resistant, Weldable
Temperature Coefficient ±50ppm/°C
Operating Temperature -65°C ~ 175°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.094" Dia x 0.250" L (2.39mm x 6.35mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate S (0.001%)

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MFR50SFBE52-8K RES MF 1/2W 1% AXIAL 420,210 $0.0119 100%
RN60C8041FB14 RES 8.04K OHM 1/4W 1% AXIAL 42,561 $0.1176 100%
RNC55H8051FSB14 RES 8.05K OHM 1/8W 1% AXIAL 5,383 $0.9363 99%
MFR50SDRE52-8K RES MF 1/2W 0.5% AXIAL 317,491 $0.0158 76%
CMF558K0600DHR6 RES 8.06K OHM 1/2W .5% AXIAL 31,928 $0.1568 76%
CMF558K0600DHBF RES 8.06K OHM 1/2W .5% AXIAL 4,015 $1.2600 76%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Vishay / Dale Parts in Stock

Request a Quote

Need RNC55H8001FSB14 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.