RNC55H7051FSBSL Vishay / Dale component image

RNC55H7051FSBSL

In Stock

Vishay / Dale logo Vishay / Dale · franchised distributor

ERC-55 7.05K 1% T-2 RNC55H7051FS

Listed in Through Hole Resistors

4,944 pcs in stock ships same day before 6pm

from $1.0214

Quantity Unit Price
1+ $1.0214 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the RNC55H7051FSBSL?

RNC55H7051FSBSL is a erc-55 7.05k 1% t-2 rnc55h7051fs, featuring a power rating of 0.125W, 1/8W, a tolerance of ±1%, a Metal Film composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Part Number Logic · Vishay Dale

Reading RNC55H7051FSBSL

RNC Series— MIL-PRN-39009/06018 qualified precision thin-film resistor (Vishay Dale)
55 Case code— 55=0.250W axial
H Tolerance— H=±0.1%
— Value code— 4-digit EIA with R decimal
— Packaging— See suffix

Full ordering code structure for every value in this series is covered in the datasheet's Ordering Information section.

Technical Parameters

RNC55H7051FSBSL Specifications

Series Military, MIL-PRF-55182/01, RNC55
Package Bulk
Part Status Active
Resistance 7.05 kOhms
Tolerance ±1%
Power (Watts) 0.125W, 1/8W
Composition Metal Film
Features Military, Moisture Resistant, Weldable
Temperature Coefficient ±50ppm/°C
Operating Temperature -65°C ~ 175°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.094" Dia x 0.250" L (2.39mm x 6.35mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate S (0.001%)

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
RNC55H7051FSB14 RES 7.05K OHM 1/8W 1% AXIAL 5,372 $0.9363 100%
RNC50H7061FSB14 RES 7.06K OHM 1/10W 1% AXIAL 3,556 $1.4231 100%
RNC55H7021FSB14 RES 7.02K OHM 1/8W 1% AXIAL 5,374 $0.9363 100%
CMF557K0600DHEA RES 7.06K OHM 1/2W .5% AXIAL 39,208 $0.1277 76%
RN60C7061BRSL RES 7.06K OHM 1/4W .1% AXIAL 10,892 $0.4608 62%
RN60C7061BRE6 RES 7.06K OHM 1/4W .1% AXIAL 19,338 $0.2592 62%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Vishay / Dale Parts in Stock

Request a Quote

Need RNC55H7051FSBSL or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.