RNC50H37R4FSRSL31 Vishay / Dale component image

RNC50H37R4FSRSL31

In Stock

Vishay / Dale logo Vishay / Dale · franchised distributor

ERC-50-31 37.4 1% T-2 RNC50H37R4

Listed in Through Hole Resistors

1,239 pcs in stock ships same day before 6pm

from $4.1760

Quantity Unit Price
1+ $4.1760 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the RNC50H37R4FSRSL31?

RNC50H37R4FSRSL31 is a erc-50-31 37.4 1% t-2 rnc50h37r4, featuring a power rating of 0.1W, 1/10W, a tolerance of ±1%, a Metal Film composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Part Number Logic · Vishay Dale

Reading RNC50H37R4FSRSL31

RNC Series— MIL thin-film (Vishay)
50 Case— 50=0.125W
H Tolerance— H=±0.1%

Full ordering code structure for every value in this series is covered in the datasheet's Ordering Information section.

Technical Parameters

RNC50H37R4FSRSL31 Specifications

Series Military, MIL-PRF-55182/07, RNC50
Package Bulk
Part Status Active
Resistance 37.4 Ohms
Tolerance ±1%
Power (Watts) 0.1W, 1/10W
Composition Metal Film
Features Military, Moisture Resistant, Weldable
Temperature Coefficient ±50ppm/°C
Operating Temperature -65°C ~ 175°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.070" Dia x 0.150" L (1.78mm x 3.81mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate S (0.001%)

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
ERC5537R400FHEA500 ERC-55-500 37.4 1% T-2 EA E3 15,709 $0.3192 100%
FMP100FRE52-37R4 RES MF 1W 1% AXIAL 181,198 $0.0276 100%
MFR25SFRE52-37R4 RES MF 1/4W 1% AXIAL 484,541 $0.0103 100%
RNC55H37R4FSRE5 ERC-55 37.4 1% T-2 RNC55H37R4FS 8,894 $0.5648 100%
RNC55H37R4FSRE765 ERC-55-65 37.4 1% T-2 RNC55H37R4 5,518 $0.9111 100%
RNC55H37R4FSBSL65 ERC-55-65 37.4 1% T-2 RNC55H37R4 1,880 $2.7195 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Vishay / Dale Parts in Stock

Request a Quote

Need RNC50H37R4FSRSL31 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.