RN65E1002DBSL Vishay / Dale component image

RN65E1002DBSL

In Stock

Vishay / Dale logo Vishay / Dale · franchised distributor

RES 10K OHM 1/2W .5% AXIAL

Listed in Through Hole Resistors

2,792 pcs in stock ships same day before 6pm

from $1.0886

Quantity Unit Price
1 - 99 $1.8144
100 - 299 $1.8144
300 - 499 $1.5552
500 - 999 $1.2960
1,000 - 4,999 $1.1232
5,000+ $1.0886 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the RN65E1002DBSL?

RN65E1002DBSL is a res 10k ohm 1/2w .5% axial, featuring a power rating of 0.5W, 1/2W, a tolerance of ±0.5%, a Metal Film composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Vishay / Dale Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
RN55C1211FBSL RES 1.21K OHM 1/8W 1% AXIAL 3,354 $1.5120 In Stock
RN55C3831FBSL RES 3.83K OHM 1/8W 1% AXIAL 3,339 $1.5120 In Stock
RN55E4420FRSL RES 442 OHM 1/8W 1% AXIAL 13,420 $0.3735 In Stock
RN55E3971BB14 RES 3.97K OHM 1/8W .1% AXIAL 3,999 $1.2600 In Stock
RN55C8662BBSL RES 86.6K OHM 1/8W .1% AXIAL 3,338 $1.5120 In Stock
RN60C1960BRE6 RES 196 OHM 1/4W .1% AXIAL 19,336 $0.2592 In Stock
RN60C5110BB14 RES 511 OHM 1/4W .1% AXIAL 4,008 $1.2600 In Stock
RN60C1542FRE6 RES 15.4K OHM 1/4W 1% AXIAL 42,551 $0.1176 In Stock
RN60C1541BRE6 RES 1.54K OHM 1/4W .1% AXIAL 19,325 $0.2592 In Stock
RN55C4324FB14 RES 4.32M OHM 1/8W 1% AXIAL 3,439 $1.4742 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

RN65E1002DBSL Specifications

Series Military, MIL-R-10509/2, RN65
Package Bulk
Part Status Active
Resistance 10 kOhms
Tolerance ±0.5%
Power (Watts) 0.5W, 1/2W
Composition Metal Film
Features Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient ±25ppm/°C
Operating Temperature -65°C ~ 175°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.180" Dia x 0.562" L (4.57mm x 14.27mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
RN65E1002DB14 RES 10K OHM 1/2W .5% AXIAL 3,356 $1.5120 100%
RN55E1002DBSL RES 10K OHM 1/8W .5% AXIAL 3,338 $1.5120 100%
CMF6510K000CEBF RES 10K OHM 1.5W 0.25% AXIAL 3,026 $1.6716 76%
CMF5510K000FEEB70 RES 10K OHM 1/2W 1% AXIAL 21,180 $0.2365 76%
CMF5010K000BEEK RES 10K OHM 1/4W .1% AXIAL 3,161 $1.6065 63%
CMF5510K000BERE70 RES 10K OHM 1/2W .1% AXIAL 14,792 $0.3392 63%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Vishay / Dale Parts in Stock

Request a Quote

Need RN65E1002DBSL or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.