RFDIP2520080TM0T62 Walsin Technology component image

RFDIP2520080TM0T62

In Stock

Walsin Technology logo Walsin Technology · franchised distributor

RF DIPLEXER 1.575/2.45GHZ 1008

Listed in RF Multiplexers

25,705 pcs in stock ships same day before 6pm

from $0.1949

Quantity Unit Price
1 - 1,999 $0.1949 BEST
2,000+ $0.1949 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the RFDIP2520080TM0T62?

RFDIP2520080TM0T62 is a rf diplexer 1.575/2.45ghz 1008, featuring the 1008 (2520 Metric), 9 PC Pad case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Walsin Technology Series Variants in Stock

29 variants of this series in stock
Part Number Description Stock Unit Price Status
RFDPA391300SBAB8G1 RF ANT 2.4GHZ WHIP TILT RP-SMA 186 $35.2512 In Stock
RFDPA171310NNAB3G1 RF ANT 2.4GHZ WHIP/TILT CONN MT 587 $9.0493 In Stock
RFDPA151310NNAB3G1 RF ANT 2.4GHZ WHIP/TILT CONN MT 610 $8.6184 In Stock
RFDPA870900SBLB8G1 RF ANT 2.4GHZ/5.2GHZ WHIP TILT 893 $5.8968 In Stock
RFDPA870910NNAB3G1 RF ANT 2.4GHZ WHIP/TILT CONN MT 660 $8.1000 In Stock
RFDPA151300SBLB8G1 RF ANT 2.4GHZ/5.2GHZ WHIP TILT 2,253 $2.2680 In Stock
RFANT5220110A2T RF ANT 2.4GHZ CHIP SOLDER SMD 7,174 $0.7000 In Stock
+ 22 more variants in stock — browse the full category

Technical Parameters

RFDIP2520080TM0T62 Specifications

Series RFDIP
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Type Diplexer
Frequency Bands (Low / High) 1.565GHz ~ 1.585GHz / 2.4GHz ~ 2.5GHz
Low Band Attenuation (min / max dB) -
High Band Attenuation (min / max dB) 30.00dB / -
Return Loss (Low Band / High Band) 10.0dB / 10.0dB
Mounting Type Surface Mount
Package / Case 1008 (2520 Metric), 9 PC Pad

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Walsin Technology Parts in Stock

Request a Quote

Need RFDIP2520080TM0T62 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.