REF6230IDGKR Texas Instruments component image

REF6230IDGKR

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC VREF SERIES 0.05% 8VSSOP

Listed in PMIC - Voltage Reference

1,251 pcs in stock ships same day before 6pm

from $4.0040

Quantity Unit Price
1 - 2,499 $4.1580
2,500+ $4.0040 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the REF6230IDGKR?

REF6230IDGKR is a ic vref series 0.05% 8vssop, featuring the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

11 variants of this series in stock
Part Number Description Stock Unit Price Status
REF6241IDGKR IC VREF SERIES 0.05% 8VSSOP 1,248 $4.1580 In Stock
REF6225IDGKT IC VREF SERIES 0.05% 8VSSOP 605 $8.9400 In Stock
REF6233IDGKR IC VREF SERIES 0.05% 8VSSOP 1,237 $4.1580 In Stock
REF6250IDGKT IC VREF SERIES 0.05% 8VSSOP 590 $8.9400 In Stock
REF6245IDGKT IC VREF SERIES 0.05% 8VSSOP 595 $8.9400 In Stock
REF6241IDGKT IC VREF SERIES 0.05% 8VSSOP 592 $8.9400 In Stock
REF6250IDGKR IC VREF SERIES 0.05% 8VSSOP 1,250 $4.1580 In Stock
REF6230IDGKT IC VREF SERIES 0.05% 8VSSOP 592 $8.9400 In Stock
REF6225IDGKR IC VREF SERIES 0.05% 8VSSOP 1,243 $4.1580 In Stock
REF6245IDGKR IC VREF SERIES 0.05% 8VSSOP 1,237 $4.1580 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

REF6230IDGKR Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Reference Type Series
Output Type Fixed
Voltage - Output (Min/Fixed) 3V
Voltage - Output (Max) -
Current - Output 4 mA
Tolerance ±0.05%
Temperature Coefficient 3ppm/°C
Noise - 0.1Hz to 10Hz 3µVp-p
Noise - 10Hz to 10kHz -
Voltage - Input 3.25V ~ 5.5V
Current - Supply 1.1mA
Current - Cathode -
Operating Temperature 0°C ~ 70°C (TA)
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package 8-VSSOP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need REF6230IDGKR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.