RC14JB100R Stackpole Electronics, Inc. component image

RC14JB100R

In Stock

Stackpole Electronics, Inc. logo Stackpole Electronics, Inc. · franchised distributor

RES 100 OHM 1/4W 5% AXIAL

Listed in Through Hole Resistors

46,427 pcs in stock ships same day before 6pm

from $0.0204

Quantity Unit Price
1 - 9 $0.1078
10 - 24 $0.0769
25 - 49 $0.0600
50 - 99 $0.0508
100 - 249 $0.0400
250 - 499 $0.0338
500 - 999 $0.0277
1,000 - 4,999 $0.0215
5,000+ $0.0204 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the RC14JB100R?

RC14JB100R is a res 100 ohm 1/4w 5% axial, featuring a power rating of 0.25W, 1/4W, a tolerance of ±5%, a Carbon Composition composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Stackpole Electronics, Inc. Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
RC14JB2R40 RES 2.4 OHM 1/4W 5% AXIAL 46,428 $0.1078 In Stock
RC14JB15R0 RES 15 OHM 1/4W 5% AXIAL 9,291 $0.5400 In Stock
RC12JB9R10 RES 9.1 OHM 1/2W 5% AXIAL 37,633 $0.1330 In Stock
RC12JT36R0 RES 36 OHM 1/2W 5% AXIAL 39,604 $0.1264 In Stock
RC14JB220R RES 220 OHM 1/4W 5% AXIAL 9,303 $0.5400 In Stock
RC12JB1K00 RES 1K OHM 1/2W 5% AXIAL 7,625 $0.6600 In Stock
RC14JT51R0 RES 51 OHM 1/4W 5% AXIAL 9,308 $0.5400 In Stock
RC14JB2K40 RES 2.4K OHM 1/4W 5% AXIAL 46,414 $0.1078 In Stock
RC14KT22K0 RES 22K OHM 1/4W 10% AXIAL 50,161 $0.0998 In Stock
RC14JB1K20 RES 1.2K OHM 1/4W 5% AXIAL 46,414 $0.1078 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

RC14JB100R Specifications

Series RC
Package Bulk
Part Status Active
Resistance 100 Ohms
Tolerance ±5%
Power (Watts) 0.25W, 1/4W
Composition Carbon Composition
Features Non-Inductive, Pulse Withstanding
Temperature Coefficient -
Operating Temperature -55°C ~ 125°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.094" Dia x 0.248" L (2.40mm x 6.30mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
OD101JE RES 100 OHM 5% 1/4W AXIAL 5,992 $0.8400 100%
OF101JE RES 100 OHM 5% 1/2W AXIAL 5,359 $0.9400 100%
QWCC110 RES-1/4W 100 OHM 5% 7,623 $0.6600 100%
RC12JB100R RES 100 OHM 1/2W 5% AXIAL 37,627 $0.1330 100%
R-30BJ500-100 1/2W CARBON COMPOSITION 100 20,037 $0.2500 100%
RC12KT100R RES 100 OHM 1/2W 10% AXIAL 44,260 $0.1131 76%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Stackpole Electronics, Inc. Parts in Stock

Request a Quote

Need RC14JB100R or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.