RC1160-MBUS3 Radiocrafts component image

RC1160-MBUS3

In Stock

Radiocrafts logo Radiocrafts · franchised distributor

RX TXRX MODULE ISM < 1GHZ RUSSIA

Listed in RF Transceiver Modules and Modems

460 pcs in stock ships same day before 6pm

from $12.0600

Quantity Unit Price
1 - 999 $12.0600 BEST
1,000+ $12.0600 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the RC1160-MBUS3?

RC1160-MBUS3 is a rx txrx module ism < 1ghz russia, featuring a frequency of 868MHz, the 8-SOIC (0.154", 3.90mm Width) case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Radiocrafts Series Variants in Stock

12 variants of this series in stock
Part Number Description Stock Unit Price Status
RC1170-MPC1-DK PULSE COUNTER DEVELOPMENT KIT 60 $250.0000 In Stock
RC1140-RC232-DK RC232 DEVELOPMENT KIT 63 $250.0000 In Stock
RC1140-MBUS3-DK WIRELESS MBUS DEVELOPMENT KIT 50 $250.0000 In Stock
RC1170HP-MBUS3-DK WIRELESS MBUS DEVELOPMENT KIT 59 $300.0000 In Stock
RC1141-TM-DK TINYMESH DEVELOPMENT KIT 69 $250.0000 In Stock
RC1170-RC232-DK RC232 DEVELOPMENT KIT 58 $250.0000 In Stock
RC1160-MBUS3-DK WIRELESS MBUS DEVELOPMENT KIT 60 $250.0000 In Stock
RC1170-MBUS3-DK WIRELESS MBUS DEVELOPMENT KIT 54 $250.0000 In Stock
RC1140-MBUS3 RX TXRX MOD ISM < 1GHZ CAST SMD 339 $16.8800 In Stock
RC1170-MBUS3 RX TXRX MOD ISM < 1GHZ CAST SMD 448 $12.0600 In Stock
+ 2 more variants in stock — browse the full category

Technical Parameters

RC1160-MBUS3 Specifications

Series Wireless M-Bus
Package Tube
Part Status Active
RF Family/Standard General ISM < 1GHz
Protocol Wireless M-Bus
Modulation -
Frequency 868MHz
Data Rate 100Kbps
Power - Output 10dBm
Sensitivity -102dBm
Serial Interfaces UART
Antenna Type Antenna Not Included, Castellation
Utilized IC / Part CC1110
Memory Size -
Voltage - Supply 2V ~ 3.6V
Current - Receiving 24mA
Current - Transmitting 37mA
Mounting Type Surface Mount
Operating Temperature -40°C ~ 85°C
Package / Case 8-SOIC (0.154", 3.90mm Width)

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Radiocrafts Parts in Stock

Request a Quote

Need RC1160-MBUS3 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.